Skip to main content

Anatomy training

WMS is the first in the UK to order a complete collection of plastinated prosections and cross sections for anatomy teaching directly from Gunther von Hagens’ Plastinarium in Germany (with funding from the Strategic Health Authority).

The prosections, some of which individually cost up to £40,000, are invaluable for training the surgeons and doctors of the future, both in anatomy tuition and for hands-on surgical training and education.

About plastinations

Plastination is a technique that stops decomposition and allows individual tissues and organs or whole bodies to be preserved.

Decomposition is a natural process triggered by cell enzymes released after death and later completed when putrification bacteria and other microorganisms colonize and further break down the body. Plastination removes water and fats from the body’s tissues and replaces them with plastic, depriving bacteria of the conditions they need to survive.

The body is embalmed with formaldehyde, and then dissected. The water and fatty tissues in the body are replaced with acetone, a solvent that evaporates easily. Then the acetone is replaced with a polymer solution—a liquid plastic. To get the polymer into each and every cell, “a specimen is placed in a vacuum chamber and the pressure is reduced to the point where the [acetone] boils. The acetone is suctioned out of the tissue at the moment it vaporizes, and the resulting vacuum in the specimen causes the polymer solution to permeate the tissue.” The process can take a few days for thin slices, or weeks for entire bodies.

After each cell is infused with liquid plastic, the body is posed. Needles and pieces of foam rubber are used to hold muscles and nerves in place until the plastic is hardened.

The Institute for Plastination uses several kinds of polymers, and each hardens under specific conditions—the presence of light, heat, or certain gases. The polymer chosen determines the look and feel of the specimen. (The posed specimens are infused with silicone rubber, which cures when exposed to a special gas.)

Preparing a whole-body plastinate takes 1,000–1,500 man-hours