Skip to main content

Richard Dashwood Recent Publications

Journal Publications

  1. Application of novel technique to examine thermomechanical processing of near beta alloy Ti-10V-2Fe-3Al
    Jackson, M; Dashwood, R J; Christodoulou, L; Flower, H M
    Materials Science and Technology. 16(11-12), pp. 1437-1444 (2000)
  2. Development of a high strain rate superplastic Al-Mg-Zr alloy
    Grimes, R; Dashwood, R J; Harrison, A W; Flower, H M
    Materials Science and Technology. 16(11-12), pp.1334-1339 (2000)
  3. High strain rate superplastic aluminium alloys: the way forward?
    Grimes, R; Dashwood, R J; Flower, H M
    Materials Science Forum. 357-359, pp. 357-362. (2001)
  4. Development of a high strain rate superplastic Al-Mg-Zr alloy
    Dashwood, R J; Grimes, R; Harrison, A W; Flower, H M
    Materials Science Forum. 357-359, pp. 339-344 (2001)
  5. Microstructures and their stability in rapidly solidified Al-Fe-(V,Si) alloy powders
    Tongsri, R; Minay, E J; Thackray, R P; Dashwood, R J; McShane, H B
    Journal of Materials Science. 36(8), pp. 1845-1856. (2001)
  6. Elevated temperature deformation behavior of dispersion-strengthened Al and Al-Li-Mg alloys
    Minary, J; Dashwood, R; McShane, H
    Journal of Materials Engineering and Performance. 10(2), pp. 136-142. (2001)
  7. Phase transformation reactions in rapidly solidified Al-6.5Fe-1.5V alloys
    Tongsri, R; Minay, E J; Thackray, R P; Dashwood, R J; McShane, H B
    Journal of Materials Science. 36(13), pp. 3197-3206. (2001)
  8. Instrumentation and simulation of industrial steel wire rod cooling line
    Labib, H F; Youssef, Y M; Dashwood, R J; Lee, P D
    Materials Science and Technology. 17(7), pp. 856-863. (2001)
  9. Latent heat evolution from TiB sub 2 particulate reinforced aluminium alloys
    Youssef, Y M; Hamilton, R W; Dashwood, R J; Lee, P D
    Materials Science Forum. 396-402(1), pp. 259-264. (2002)
  10. Powder forging of a sintered Al-3.8Cu-1Mg-0.8Si-0.1Sn alloy
    Dashwood, R J; Schaffer, G B
    Materials Science and Engineering A. 323(1-2), pp.206-212. (2002)
  11. Application of X-ray tomography to quantify the distribution of TiB sub 2 particulate in aluminium
    Hamilton, R W; Forster, M F; Dashwood, R J; Lee, P D
    Scripta Materialia. 46(1), pp. 25-29. (2002)
  12. Modeling of porosity formation in direct chill cast aluminum-magnesium alloys
    Lee, P D; Atwood, R C; Dashwood, R J; Nagaumi, H
    Materials Science and Engineering A. 328(1-2), pp.213-222. (2002)
  13. Isothermal subtransus forging of Ti–6Al–2Sn–4Zr–6Mo.
    Jackson, M; Dashwood, R J; Christodoulou, L; Flower, H;
    J. Light Metals, 2(3): 185-195, 2002.
  14. Direct semi-solid forming of a powder SiC-Al PMMC: flow analysis.
    Hamilton, R W; Zhu, Z; Dashwood, R J; Lee, P D
    Composites Part A: Applied Science and Manufacturing. 34A(4), pp. 333-339. (2003)
  15. Centrifugal casting of aluminium containing in situ formed TiB2
    Forster, M F; Hamilton, R W; Dashwood, R J; Lee, P D
    Materials Science and Technology. 19(9), pp. 1215-1219. (2003)
  16. Progress towards high superplastic strain rate aluminium alloys.
    Grimes, R; Dashwood, R J; Flower, H M; Jackson, M; Katsas, S; Todd, G
    Materials Science Forum. 447-448, pp. 213-220. (2004)
  17. Microstructure and Solidification of Al-Fe-(V, Si) Alloy Powders
    Tongsri, R; Dashwood, R; McShane, H
    ScienceAsia 30, pp. 33-41. (2004)
  18. Microstructure-Processing-Property-Relationship of Rapidly Solidified Al-Fe-(V, Si) Alloys
    Tongsri, R; Minay, J; Thackray, R; Dashwood, R; McShane, H
    ScienceAsia 30 pp. 25-31. (2004):
  19. The influence of Al3Zr precipitation on the superplastic behaviour of aluminium alloys.
    Flower, H M; Boyle, G J; Dashwood, R J; Grimes, R
    Materials Science Forum. 447-448, pp. 389-394. (2004)
  20. Optimisation of a cast one-step forging operation by virtual processing
    Hamilton, R W; Lee, P D; Dashwood, RJ; Lindley, TC;
    Materials & Design, 26 (1), 29-36, (2005)
  21. Effect of Clustering on Particle Pushing and Solidification Behaviour in TiB2 Reinforced PMMCs
    Youssef, Y M; Dashwood, R J;Lee, P D;
    Composites Part A: Applied Science and Manufacturing, 36(6), pp. 747-763 (2005)
  22. Investigation of the Latent Heat Associated with the Solidification of an Al-TiB2 Composite
    Youssef, Y M; Dashwood, R J; Lee, P D;
    Materials Science and Engineering A, 391(1-2), pp. 427-432, (2005)
  23. Investigation of the Clustering Behaviour of Titanium Diboride Particles in Aluminium
    Watson, I G; Forster, M F; Lee, P D; Dashwood, R J; Hamilton, R W; Chirazi, A;
    Composites Part A: Applied Science and Manufacturing, 36(9), pp. 1177-1187 (2005)
  24. Voltammetry of Titanium Dioxide in Molten Calcium Chloride at 900ºC
    Dring, K; Inman, D; Dashwood, R J;
    J. Electrochem. Soc. 152, pp. E104-E113 (2005)
  25. The Microstructural Evolution of Near Beta Alloy Ti-10V-2Fe-3Al during Subtransus Forging
    Jackson, M; Dashwood, R J; Christodoulou, L; Flower, H;
    Metallurgical and Materials Transactions A. 36A(5), pp. 1317-1327A. (2005)
  26. Predominance Diagrams for Electrochemical Reduction of Titanium Oxides in Molten CaCl2 Preform Precursors
    Dring, K; Dashwood, R; Inman, D
    J. Electrochem. Soc. 152, pp. D184-D190 (2005)
  27. Direct Electrochemical Prodcution of Ti-10W Alloys from Mixed Oxide Preform Precursors
    Dring, K; Bhagat, R; Jackson, M; Dashwood, R; Inman, D
    J Alloys and Compounds, 419 pp. 103–109 (2006)
  28. X-ray microtomographic characterisation of pore evolution during homogenisation and rolling of Al-6Mg.
    Youssef, Y M; Chaijaruwanich, A; Hamilton, R W; Nagaumi, H; Dashwood, R J; Lee, P D
    Materials Science and Technology. 22(9), pp. 1087-1093. (2006)
  29. Simulation of the Mechanical Properties of an Aluminium Matrix Composite using X-ray Microtomography
    Watson, I.G., Lee, P., Dashwood, R., Young, P.
    Metallurgical and Materials Transactions A. 37A(3) pp. 551-558. (2006)
  30. Pore evolution in a DC cast Al – 6 wt% Mg alloy during hot rolling
    Chaijaruwanich, A; Dashwood, RJ; Lee, PD; Nagaumi, H
    Acta Materialia. 54(19), pp. 5185-5194. (2006)
  31. Evolution of pore morphology and distribution during the homogenization of direct chill cast Al-Mg alloys
    Chaijaruwanich, A; Lee, PD; Dashwood, RJ; Youssef, YM; Nagaumi, H
    Acta Materialia. 55(1), pp. 285-293. (2007)
  32. Characterization of Lightweight Graphite Based Composites Using X-Ray Microtomography
    Sánchez, SA; Narciso, J; Rodríguez-Reinoso, F; Bernard, D; Watson, IG; Lee, PD; Dashwood, RJ
    Adv. Eng Mat, 8(6), pp. 491-495, (2006)
  33. Strength of Soldered Joints Formed under Microgravity Conditions
    Thomas, B; Atkinson, A; Dashwood, RJ
    Journal of Electronic Materials. 36(1), pp. 1-5. (2007)
  34. Dynamic recrystallisation and superplasticity in pure aluminium with zirconium addition
    Katsas, S; Dashwood, R; Grimes, R; Jackson, M; Todd, G; Henein, H
    Materials Science and Engineering A. 444(1-2), pp. 291-297. (2007)
  35. Development of Superplastic Properties in Quasi Single Phase Alloys
    Grimes, R; Dashwood, RJ; Dorban, A; Jackson, M; Katsas, S; Pong, I; Todd, G
    Materials Science Forum. 551-552, pp. 357-364, (2007)
  36. Micromechanics of Ti-10V-2Fe-3Al: In situ synchrotron characterisation and modelling
    Raghunathan, SL; Stapleton, AM; Dashwood, RJ; Jackson M; Dye, D
    Acta Materialia, 55(20), pp. 6861-6872, (2007)
  37. The evolution of microtexture and macrotexture during subtransus forging of Ti-10V-2Fe-3Al.
    Raghunathan, SL; Dashwood, RJ; Jackson M; Vogel, SC; Dye, D
    Materials Science and Engineering A; 448, pp. 8-15. (2008)
  38. Thermomechanical processing ofTi-5Al-5Mo-5V-3Cr,
    Jones, NG; Dashwood, RJ; Dye, D; Jackson, M
    Materials Science and Engineering A, 490, pp.369-377, (2008)
  39. The Production of Ti-Mo alloys from Mixed Oxide Precursors via the FFC Cambridge Process
    Bhagat, R; Jackson, M; Inman, D; Dashwood, R
    J. Electrochem. Soc., 155 (6), E63-E69 (2008)
  40. Determination of (C11 − C12) in Ti-36Nb-2Ta-3Zr-0.3O (wt.%) (Gum metal)
    Talling, R.J; Dashwood, RJ; Jackson, M; Kuramoto, S; Dye, D
    Scripta Materialia 59, pp. 669–672, (2008)
  41. Production of NiTi via the FFC Cambridge Process
    Jackson, B; Jackson, M; Dye, D; Inman, D; Dashwood, R
    J. Electrochem. Soc., 155 (12) pp. E171-E177(2008)
  42. The Manufacture of Superplastic Magnesium Alloy Sheet
    Grimes, R, Jackson, M, Moorhouse, B, Dashwood, R
    Materialwissenschaft und Werkstofftechnik, 39, pp. 340-342 (2008)
  43. Characterisation of the structure and permeability of titanium foams for spinal fusion devices
    Singh, S; Lee, PD; Lindley, TC; Dashwood, RJ; Ferrie, E; Imwinkelried, T
    Acta Biomaterialia, 5(1) pp. 477-487 (2009)
  44. Production of Ti-W Alloys from Mixed Oxide Precursors via the FFC Cambridge Process
    Bhagat, R; Jackson, M; Inman, D; Dashwood, R
    J. Electrochem. Soc., 156(1), pp. E1-E7 (2009)
  45. Effect of Initial Microstructure on Plastic Flow Behaviour during Isothermal Forging of Ti-10V-2Fe-3Al
    Jackson, M; Jones, N; Dye, D; Dashwood, RJ
    Materials Science and Engineering A, 501(1-2) pp. 248-254 (2009)
  46. Development of chevron-shaped a precipitates in Ti–5Al–5Mo–5V–3Cr
    Jones, N; Dashwood, RJ; Jackson, M; Dye, D
    Scripta Materialia 60 pp. 571–573 (2009)
  47. Compositional variability in gum metal
    Talling, R.J., Dashwood, R.J., Jackson, M., Dye, D.
    Scripta Materialia, 60 (11) 1000-1003 (2009)
  48. On the mechanism of superelasticity in Gum metal
    Talling, R.J., Dashwood, R.J., Jackson, M., Dye, D.
    Acta Materialia, 57(4) 1188-1198 (2009)
  49. The Flow Behavior and Microstructural Evolution of Ti-5Al-5Mo-5V-3Cr during Subtransus Isothermal Forging
    Jones, N.G., Dashwood, R.J., Dye, D., Jackson, M
    Met Trans A, 40(8) 1944-1954 (2009)
  50. Optimization of the FFC Cambridge Process for NiTi Production
    Jackson, B.K., Jackson, M., Inman, D., Dye, D., Dashwood R.J.
    ECS Transactions, 16 (49) 211-219 (2009)
  51. Direct extrusion of titanium alloy powder
    Tricker D, Jackson M, Dashwood R
    Materials Technology, 24 (3) 174-179 (2009)
  52. Influence of subsequent cold work on the superplastic properties of a friction stir welded (FSW) aluminium
    Katsas S, Dashwood R, Jackson M, Grimes R.
    Materials Science and Engineering A, 527 (4-5) 1022-1026 (2010)
  53. NiTi Production via the FFC Cambridge Process: Refinement of Process Parameters
    Jackson BK, Inman D, Jackson M, Dye, D, Dashwood RJ.
    J. Electrochem. Soc, 157 (3) E36-E43 (2010)
  54. Determination of lattice orientation in aluminium alloy grains by low energy gallium ion-channelling
    Silk JR, Dashwood RJ, Chater RJ
    Nuclear Instruments and Methods in Physics Research B 268 2064–2068 (2010)
  55. Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling
    R. Singh, P.D. Lee, T.C. Lindley, C. Kohlhauser, C. Hellmich, M. Bram, T. Imwinkelried, R.J. Dashwood
    Acta Biomaterialia 6 2342–2351(2010)

Conference Proceedings

  1. Thermal Decomposition of Quasi-crystalline Phases and Mechanical Properties after Hot Extrusion of Rapidly Solidified Al-6.5Fe-1.5V.
    M. Lieblich, R. Dashwood, R. Tongsri, M. De Sanctis, A. Solina, R. Valentini
    EUROMAT 99, Volume 1, Materials for Transportation Technology April 2000
  2. Thermomechanical processing of titanium alloys: the application of a novel technique to examine sub- beta transus isothermal forging of Ti-6Al-2Sn-4Zr-6Mo
    Jackson, M; Dashwood, R J; Christodoulou, L; Flower, H M
    Fourth Institute of Materials International Conference on the Microstructure of High Temperature Materials: Microstructure and Properties of Titanium Alloys; Birmingham; UK; 2000. pp. 89-101. 2001
  3. Simulation of the effect of tooling and billet condition on bulk and surface metal flow during extrusion
    Thackray, P R; Dashwood, R; McShane, H
    ET 2000: Seventh International Aluminum Extrusion Technology Seminar; Shaping the Future of Aluminum Extrusion Technology; Chicago, IL; USA; 16-19 May 2000. pp. 213-223. 2000
  4. Cost effective high superplastic strain rate aluminium sheet
    Grimes, R; Dashwood, R; Harrison, A; Flower, H
    4th International ESAFORM Conference on Material Forming ; Liege; Belgium; 23-25 Apr. 2001. pp. 717-720. 2001
  5. Powder forging of an aluminium alloy
    Schaffer, G B; Dashwood, R J
    PM2TEC 2001: 2001 International Conference on Powder Metallurgy & Particulate Materials; New Orleans, LA; USA; 13-17 May 2001. 8 pp. 2001
  6. The Application of a Novel Technique to Examine Sub-P Transits Isothermal Forging of Titanium Alloys
    Jackson, M; Dashwood, R; Christodoulou, L; and Flower, H.M.
    Lightweight Alloys for Aerospace Applications, Edited by Kumar Jata, Eui Whee Lee, William Frazier and Nack J. Kim TMS (The Minerals, Metals & Materials Society), 2001, p 230
  7. Semi Solid Forming of Commercial SiCp Reinforced Aluminium Alloy Powder
    Fujii, T; Dashwood, R; McShane, H
    Proceedings of the 7th International Conference on Semi-Solid Processing of Alloys and Composites; Tsukuba, Japan September 2002 pp191-196. 2002
  8. Enhanced formability of superplastic AlMgZr alloys made by particulate routes
    Cook, R; Grimes, R; Dashwood, R J
    Ultrafine Grained Materials II (as held at the 2002 TMS Annual Meeting); Seattle, WA; USA; 17-21 Feb. 2002. pp. 281-288. 2002
  9. Multiscale modelling applied to the virtual processing of a PMMC automotive component
    Hamilton, R W; Youssef, Y; Dashwood, R J; Lee, P D
    Light Metals (Metaux Legers) 2002: Montreal, Quebec; Canada; 11-14 Aug. 2002. pp. 617-630. 2002
  10. Modeling the direct powder semi-solid molding (DPSM) of a particle metal matrix composite.
    Hamilton, R W; Dashwood, R J; Lee, P D
    Modeling of Casting, Welding and Advanced Solidification Processes - X; Destin, FL; USA; 25-30 May 2003. pp. 573-580. 2003
  11. Processing of High superplastic strain rate aluminium alloys.
    Dashwood, R; Grimes, R; Flower, H
    Aluminium International Today. Vol. 15, no. 5, pp. 64-66.Sept.-Oct. 2003
  12. Electrochemical deoxidation mechanisms of titanium oxides.
    Dring, K; Jackson, M; Dashwood, R; Flower, H; Inman, D
    Cost-Affordable Titanium: A Symposium Dedicated to Professor Harvey Flower as held at the 2004 TMS Annual Meeting; Charlotte, NC; USA; 14-18 Mar. 2004. pp. 95-102. 2004
  13. Wiredrawing of Low Cost Beta Titanium (Timetal LCB)
    Jackson, M; Dashwood, R J; Christodoulou, L; Flower, H;
    Proc. Ti-2003 10th World Conference on Titanium Ed. G.Lutjering and J. Albrecht, Wiley-VCH, 2004, pp. 357-364.
  14. The Microstructural Sensitivity of Ti-10V-2Fe-3Al During Isothermal Forging at Subtransus Temperatures
    Jackson, M; Dashwood, R J; Christodoulou, L; Flower, H;
    Proc. Ti-2003 10th World Conference on Titanium Ed. G.Lutjering and J. Albrecht, Wiley-VCH, 2004, pp. 1187-1194.
  15. The Effect of Continuous Extrusion (ConformTM) on the Superplastic Behaviour of Al-Mg-Zr Alloys
    Todd, G., Dashwood, R., Grimes, R., Jackson, M., Katsas, S., Thomas, P.
    4th European Conference on Superplastic Forming Euro SPF’05, 153-152, 2005.
  16. The Use of Friction Stir Welding in Conjunction with Superplastic Forming for the Manufacture Multi Sheet Components
    Dorban, A., Dashwood, R., Grimes, R., Jackson, M., Katsas, S., Todd, G., Nunn, M., Threadgill, P.
    4th European Conference on Superplastic Forming Euro SPF’05, 147-152, 2005.
  17. Superplasticity in Binary Al-Zr Alloys
    Katsas, S., Dashwood, R., Grimes, R., Jackson, M., Todd, G., Henein, H.,
    4th European Conference on Superplastic Forming Euro SPF’05, 17-21, 2005.
  18. Voltammetry of Titanium Dioxide in Molten Calcium Chloride
    K Dring, R Dashwood, and D Inman
    Proc. Molten Salt 7, Toulouse, 29 August – 2 September, 2005 pp.153-156
  19. Morphing Wing Technologies Research
    A Fontanazza, R Talling, M Jackson, R Dashwood, D Dye and L Iannucci,
    SEAS DTC 1st Annual Technical Conference, T Doggart, ed., Edinborough, UK, paper S7, 2006.
  20. Deformation of Ti-36Nb-2Ta-3Zr-0.3O (Gum metal )
    R J Talling, M Jackson, R Dashwood, L Iannucci and D Dye,
    SEAS DTC 2nd Annual Technical Conference, T Doggart, ed., Edinborough, UK, 2007.
  21. Development of the FFC Cambridge Process for the Production of Titanium and its Alloys
    Dashwood, Richard; Jackson, Martin; Dring, Kevin; Rao, Kartik; Bhagat, Rohit; Inman, Douglas
    Innovations in Titanium Technology , pp. 49-58. 2007
  22. The evolution of lattice strain in Ti-10V-2Fe-3Al during tensile loading at room temperature
    S Raghunathan, A Stapleton, R Dashwood, M Jackson and D Dye.
    Ti2007 Science and Technology: Proceedings of the 11th World Conference on Titanium, July 2007, Kyoto, Japan.
  23. Kinetics of the Electro-deoxidation of Titanium Dioxide in Molten Calcium Chloride
    K Rao, D Inman, D Brett and R Dashwood
    Ti2007 Science and Technology: Proceedings of the 11th World Conference on Titanium, July 2007, Kyoto, Japan
  24. Cathodic Behaviour of Titanium Dioxide in Molten Calcium Chloride-Based Electrolyte,
    K Dring, K Rao, R Dashwood, and D Inman
    Ti2007 Science and Technology: Proceedings of the 11th World Conference on Titanium, July 2007, Kyoto, Japan
  25. Direct Electrochemical Production of Ti-10V-2Fe-3Al from Mixed Oxide Precursors,
    K Dring, R Bhagat, M Jackson, R Dashwood, and D Inman
    Ti2007 Science and Technology: Proceedings of the 11th World Conference on Titanium, July 2007, Kyoto, Japan
  26. Application of the FFC Cambridge Process for the Production of Titanium Alloys,
    R Dashwood, M Jackson, K Dring, K Rao, R Bhagat, and D Inman
    Ti2007 Science and Technology: Proceedings of the 11th World Conference on Titanium, July 2007, Kyoto, Japan
  27. Comparing the hot working behaviour of high strength beta alloys Ti-5Al-5Mo-5V-3Cr and Ti-10V-2Fe-3Al
    N Jones, M Jackson, D Dye and R Dashwood
    Ti2007 Science and Technology: Proceedings of the 11th World Conference on Titanium, July 2007, Kyoto, Japan.
  28. Deformation of Ti-36Nb-2Ta-3Zr-0.3O (Gum Metal)
    R J Talling, M Jackson, R Dashwood and D Dye.
    Ti2007 Science and Technology: Proceedings of the 11th World Conference on Titanium, July 2007, Kyoto, Japan.
  29. The Development of a New Manufacturing Route for Superplastic Magnesium Alloy Sheet Exploiting Twin Roll Casting
    Richard Dashwood, Martin Jackson, David Klaumünzer, Zhongyun Fan, Roger Grimes.
    EURO SPF 2008 Carcassonne France September 2008 (http://hal.archives-ouvertes.fr/hal-00338054/en/)

Keynote and Invited Lectures

  1. Techniques for Thermomechanical Property Evaluation in Ti Based Materials
    Third Pacific Rim International Conference on Advanced Materials and Processing, Hawaii, July 12-16, 1998
  2. Electrochemical Studies on the FFC Cambridge Process for the Production of Titanium
    Electrochem 2007. London, September 3-4, 2007
  3. Development of the FFC Cambridge Process for the Production of Titanium and its Alloys (Keynote)
    TMS Annual Meeting. Orlando, February 19-22, 2007
  4. Application of the FFC Cambridge Process for the Production of Titanium Alloys (Keynote)
    Ti 2007. Kyoto, June 3-7, 2007
  5. Towards an Economic Route for Superplastically Formed Magnesium Alloy Components
    Magnesium Alloys: Future Technologies, Applications and Opportunities, Manchester, 24th January 2008
  6. The Development of Superplastic Magnesium Alloy Sheet
    ICASM 2009. Seattle, Jun 29 – July 2 2009
  7. Application of Superplastic Forming in the Automotive Industry
    SMEA, Sheffield, July 7 -8 2009