Skip to main content Skip to navigation

Publications

View Publications

View Journals        View Books and Chapters        View Conferences        View Other

Journals


  • Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dibling, Greg, McLoughlin, James, Muirhead-Allwood, Sarah, King, Richard, Williams, M. A.. 2018. Computed tomography metrological examination of additive manufactured acetabular hip prosthesis cups. Additive Manufacturing, 22, pp. 146-152, View
  • Wilson, Paul, Smith, M. P., Hay, J., Warnett, Jason M., Attridge, Alex, Williams, M. A. (Mark A.). 2018. X-ray computed tomography (XCT) and chemical analysis (EDX and XRF) used in conjunction for cultural conservation: the case of the earliest scientifically described dinosaur Megalosaurus bucklandii. Heritage Science, 6 (1), View
  • Wilson, Paul, Stott, Janet, Warnett, Jason M., Attridge, Alex, Smith, M. Paul, Williams, M. A.. 2018. Evaluation of touchable 3D-printed replicas in museums. Curator: The Museum Journal, 60 (4), pp. 445-465, View
  • Wilson, Paul, Stott, Janet, Warnett, Jason M., Attridge, Alex, Smith, M. Paul, Williams, M. A.. 2018. Museum visitor preference for the physical properties of 3D printed replicas. Journal of Cultural Heritage, View
  • Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dahnel, Aishah Najiah, Ascroft, Helen, Barnes, Stuart, Williams, M. A.. 2017. A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8), pp. 1417-1427, View
  • Warnett, Jason M., Titarenko, Valeriy, Kiraci, Ercihan, Attridge, Alex, Lionheart, William R. B., Withers, Philip J., Williams, M. A.. 2016. Towards in-process x-ray CT for dimensional metrology. Measurement Science and Technology, 27 (3), pp. 1-14, View
  • Kiraci, Ercihan, Turley, Glen A., Attridge, Alex, Olifent, Alan, Williams, M. A. (Mark A.). 2016. Evaluating the capability of laser scanning to measure an automotive artefact : a comparison study of touch trigger probe and laser-scanning. International Journal of Productivity and Quality Management, 18 (4), pp. 440-455, View
  • Kiraci, Ercihan, Franciosa, Pasquale, Turley, Glen A., Olifent, Alan, Attridge, Alex, Williams, M. A.. 2016. Moving towards in-line metrology : evaluation of a Laser Radar system for in-line dimensional inspection for automotive assembly systems. International Journal of Advanced Manufacturing Technology, View
  • Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Kiraci, Ercihan, Gupta, Aniruddha, Barnes, Stuart, Williams, M. A. (Mark A.). 2015. Metrological study of CFRP drilled holes with x-ray computed tomography. The International Journal of Advanced Manufacturing Technology, 78 (9-12), pp. 2025-2035, View
  • Thornby, J. A., Landheer, D., Williams, T., Barnes-Warden, J., Fenne, P., Norman, D. G., Attridge, A., Williams, M. A.. 2014. Inconsistency in 9 mm bullets : correlation of jacket thickness to post-impact geometry measured with non-destructive X-ray computed tomography. Forensic Science International, 234, pp. 111-119, View
  • Turley, Glen A., Kiraci, Ercihan, Olifent, Alan, Attridge, Alex, Tiwari, Manoj K., Williams, M. A. (Mark A.). 2014. Evaluation of a multi-sensor horizontal dual arm coordinate measuring machine for automotive dimensional inspection. The International Journal of Advanced Manufacturing Technology, Volume 72 (Number 9-11), pp. 1665-1675, View
  • Kumar, Jagadeesha, Landheer, Dirk, Barnes-Warden, Jane, Fenne, Paul, Attridge, Alex, Williams, M. A. (Mark A.). 2012. Inconsistency in 9mm bullets measured with non-destructive X-ray computed tomography. Forensic Science International, Vol.214 (No.1-3), pp. 48-58, View
  • Kiraci, Ercihan, Attridge, Alex, Williams, M. A. (Mark A.). 2012. The use of laser scanning technology to improve the design process. Applied Mechanics and Materials, Vol.110-116 (Part 1-7), pp. 4118-4122, View
  • Kumar, Jagadeesha, Abulrub, Abdul-Hadi G., Attridge, Alex, Williams, M. A. (Mark A.). 2012. Effect of X-ray computed tomography scanning parameters on the estimated porosity of foam specimens. Applied Mechanics and Materials, Vol.110-116 (Part 1-7), pp. 808-815, View
  • Pitts, Matthew J., Burnett, Gary, Skrypchuk, Lee, Wellings, Tom, Attridge, Alex, Williams, M. A. (Mark A.). 2012. Visual-haptic feedback interaction in automotive touchscreens. Displays, Vol.33 (No.1), pp. 7-16, View
  • Pitts, Matthew J., Skrypchuk, Lee, Wellings, Tom, Attridge, Alex, Williams, M. A. (Mark A.). 2012. Evaluating user response to in-car haptic feedback touchscreens using the Lane Change Test. Advances in Human-Computer Interaction, 2012, View
  • Kumar, Jagadeesha, Attridge, Alex, Wood, P. K. C., Williams, M. A. (Mark A.). 2011. Analysis of the effect of cone-beam geometry and test object configuration on the measurement accuracy of a computed tomography scanner used for dimensional measurement. Measurement Science and Technology, Volume 22 (Number 3), View
  • Abulrub, Abdul-Hadi G., Attridge, Alex, Williams, M. A. (Mark A.). 2011. Virtual reality in engineering education: the future of creative learning. International Journal of Emerging Technologies in Learning, Vol.6 (No.4), View
  • Williams, M. A. (Mark A.), Attridge, Alex, Pitts, Matthew J.. 2011. User-centred design and evaluation of automotive seat adjustment controls. International Journal of Vehicle Design, Vol.55 (No.2-4), pp. 119-138, View
  • Attridge, Alex, Williams, M. A. (Mark A.), Tennant, Charles. 2007. The role of physical modelling in the design verification stage of the automotive NPI process in the premium sector. International Journal of Automotive Technology and Management, 7 (1), pp. 32-54, View




Page 1 of 1