Skip to main content

Manufacturing Systems Publications

Journal Papers
  • 1994
  • 1995
  • 1996
  • 1997
  • 1998
  • 1999
  • 2000
  • 2001
  • 2002
  • 2003
  • 2004
  • 2005
  • 2006
  • 2007
  • 2008
  • 2009
  • 2010
  • 2012
  • 2013
  • 2014
  • 2015
Selected Refereed Conference Papers
Journal Papers
1994

1. Ceglarek, D., Shi, J., Wu, S.M., 1994 "A Knowledge-based Diagnosis Approach for the Launch of the Auto-body Assembly Process" Trans. of ASME, Journal of Engineering for Industry, Vol. 116, No. 4, pp. 491-499.(PDF Document)



1995
2. Ceglarek, D., Shi, J., 1995 "," Dimensional Variation Reduction for Automotive Body Assembly", Manufacturing Review, Vol. 8, No. 2, pp. 139 - 154.(This paper is featured on the Cover Page of the Manufacturing Review journal.View the Cover Page). (PDF Document)



1996
3. Ceglarek, D., Shi, J., 1996 " Fixture Failure Diagnosis for the Autobody Assembly Using Pattern Recognition," Trans. of ASME, Journal of Engineering for Industry, Vol. 118, No. 1, pp. 55-66. (PDF Document)

4. Shiu, B.W., Ceglarek, D., Shi, J., 1996" Multi-stations Sheet Metal Assembly Modeling and Diagnostics," Trans. of NAMRI, Vol. XXIV, pp.199-204. (PDF Document)


1997
5. Shiu, B.W., Ceglarek, D., Shi, J., 1997 " Flexible Beam-Based Modeling of Sheet Metal Assembly for Dimensional Control," Trans. of NAMRI, Vol. XXV, pp. 49-54 (PDF Document)


1998
6. Ceglarek, D., Shi, J., 1998 " Design Evaluation of Sheet Metal Joints for Dimensional Integrity," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 2, p. 452-460. (PDF Document)

7. Khan, A., Ceglarek, D., Ni, J., 1998 " Sensor Location Optimization for Fault Diagnosis in Multi-Fixture Assembly Systems," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 4, pp. 781-792, also in 1996 ASME International Mechanical Engineering Congress and Exposition, MED-4, pp. 473-484, Atlanta, GA. (PDF Document)

8. Ceglarek, D., 1998 " Multivariate Analysis and Evaluation of Adaptive Sheet Metal Assembly Systems," Annals of CIRP, Vol. 47/1, pp. 17-22. (PDF Document)


1999
9. Khan, A., Ceglarek, D., Shi, J., Ni, J., Woo, T. C., 1999 " Sensor Optimization for Fault Diagnosis in Single Fixture System: A Methodology," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 121, No. 1, pp. 109-117. (PDF Document)

10. Ceglarek, D., Shi, J., 1999 " Fixture Failure Diagnosis for Sheet Metal Assembly with Consideration of Measurement Noise," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 121, No. 4, pp. 771-777, also in Proceedings of the Second S.M. Wu Symposium on Manufacturing Science, pp. 168-177, Ann Arbor, MI, May 24. (PDF Document)

TOP



2000
11. Khan, A., Ceglarek, 2000 " Sensor Optimization for Fault Diagnosis in Multi-Fixture Assembly Systems with Distributed Sensing," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 122, No. 1, pp. 215-226, also in 1998 ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, MED-Vol. 8, pp. 315-324. (PDF Document)

12. Rong, Q., Ceglarek, D., Shi, J., 2000 " Dimensional Fault Diagnosis for Compliant Beam Structure Assemblies," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 122, No. 4, pp. 773-780, also in 1998 ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, MED-Vol. 8, pp. 93-102. (PDF Document)


2001 
13. Rong, Q., Shi, J., Ceglarek, D., 2001 " Adjusted Least Squares Approach for Diagnosis of Compliant Assemblies in the Presence of Ill-conditioned Problems," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 123, No. 3, pp. 453-461. (PDF Document)

14. Ceglarek, D., Li, H., Tang, Y., 2001 " Modeling and Optimization of Fixture for Handling Compliant Sheet Metal Parts," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 123, No. 3, pp. 473-480, also in 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, TN, DE-Vol. 103, pp.89-100. (PDF Document)


2002

15. Li, H.F., Ceglarek, D., Shi, J., 2002, "A Dexterous Part Holding Model for Handling Compliant Sheet Metal Parts," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 124, No. 1, pp. 109-118.(PDF Document)

16. Ding, Y., Shi, J., Ceglarek, D., 2002, "Diagnosability Analysis of Multistage Manufacturing Processes," ASME Transactions, Journal of Dynamic Systems, Measurement, and Control, Vol. 124, No. 1, pp. 1-13.(PDF Document)

17. Ding, Y., Ceglarek, D., Shi, J., 2002, "Fault Diagnosis of Multistage Manufacturing Processes by using State Space Approach," ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 124, No. 2, pp. 313-322.(PDF Document)

18. Li, H.F., Ceglarek, D., 2002 " Optimal Trajectory Planning for Material Handling of Compliant Sheet Parts," Trans. of ASME, Journal of Mechanical Design, Vol. 124, No. 2, pp. 212-222, also in Proceedings of the Japan-USA Symposium on Flexible Automation, Hiroshima, Japan, July 15-17, 2002.

The paper was selected as one of the 2002 Best Paper Award Finalist, Japan-USA Symposium on Flexible Automation.(PDF Document)


19. Ding, Y., Ceglarek, D., Shi, J., 2002, "Design Evaluation of Multi-station Assembly Processes by Using State Space Approach," Trans. of ASME, Journal of Mechanical Design, Vol. 124, No 3, pp. 408-418, also in Proceedings of the ASME 2002 Design Engineering Technical Conferences (DETC) and Computers and Information in Engineering Conference (DETC2002/DFM-34192), Montreal, Canada, September 29-October 2, 2002.(PDF Document)

20. Huang, W., Ceglarek, D., 2002 "Mode-based Decomposition of Part Form Error by Discrete-Cosine-Transform with Implementation to Assembly and Stamping System with Compliant Parts," Annals of CIRP, Vol.51 No.1, pp. 21 -26.

My Ph.D. student and co-author Wenzhen Huang received 2002 INFORMS QSR Section Best Student Paper Award for an early version of this paper.(PDF Document)


2003
21. Shiu, B.W., Apley, D., Ceglarek, D., Shi, J., 2003 " Tolerance Allocation for Sheet Metal Assembly using Beam-Based Model", Trans. of IIE, Design and Manufacturing,, Vol. 35, No. 4, pp. 329-342. (April 2003).
The paper was also summarized and featured in the March 2003 edition of Industrial Engineer (formerly IIE Solutions). View The Summary".(PDF Document)

22. Kong, Z., Ceglarek, D. 2003, " Fixture Configuration Synthesis for Reconfigurable Assembly Using Procrustes-based Pairwise Optimization," Transactions of NAMRI, Vol. 31, pp. 403-410. (PDF Document)

23. Ding, Y., Kim, P., Ceglarek, D., Jin, J., 2003, " Optimal Sensor Distribution for Variation Diagnosis in Multi-station Assembly Processes," IEEE Transactions on Robotics and Automation, Vol. 19(4), pp. 543-556. (PDF Document)

24. Kong, Z., Ceglarek, D. 2003, " Rapid Deployment of Reconfigurable Assembly Fixtures using Workspace Synthesis and Visibility Analysis," Annals of the CIRP, Vol. 52/1, pp. 13-16. (PDF Document)

25. Camelio, J., Hu, S.J., Ceglarek, D., 2003, " Modeling Variation Propagation of Multi-station Assembly Systems with Compliant Parts," Trans. of ASME, Journal of Mechanical Design, Vol. 125, No. 4, pp. 673-681, also in the 6th Design for Manufacturing Conference, ASME International 2001 Design Engineering Technical Conferences (DETC), September 9-12, 2001, Pittsburgh, Pennsylvania.
An early shorter version of the paper received 2001Best Paper Award from the ASME Design Engineering Division. This award was granted to a single paper selected among 64 papers in the area of design for manufacturing presented during the 2001 ASME Design Technical Engineering Conferences (DETC'01) in Pittsburgh, PA.(PDF Document)

TOP



2004
26. Huang, W., Kong, Z., Ceglarek, D., Brahmst, E., 2004 " The Analysis of Feature-based Measurement Error in Coordinate Metrology," IIE Transactions on Design and Manufacturing, Vol. 36, No. 3, pp. 237-251. (PDF Document)

27. Ceglarek D, Jin J, 2004, " Modeling and analysis for complex production systems. Position statement," International Journal of Flexible Manufacturing Systems, Vol. 16, No.1, pp. 5-9 (PDF Document)

28. Ceglarek, D., Huang, W., Zhou, S., Ding, Y, Kumar, R., Zhou Y., 2004, " Time-based Competition in Manufacturing: Stream-of-Variation Analysis (SOVA) Methodology- Review," International Journal of Flexible Manufacturing Systems, Vol.16, No.1, pp.11-44. (PDF Document)

29. Huang, W., Ceglarek, D., 2004, " Tolerance Analysis for Design of Multistage Manufacturing Processes using Number-Theoretical Net Method (NT-net)," International Journal of Flexible Manufacturing Systems, Vol. 16, No.1, pp.65-90. (PDF Document)

30. Mannar, K., Ceglarek, D., 2004, " Continuous Failure Diagnosis for Assembly Systems using Rough Set Approach," Annals of CIRP, Vol.53/1, pp. 39-42 .(PDF Document)

31. Takata, S., Kimura, F., Van Houten F.J.A.M., Westkamper, E., Shpitalni, M., Ceglarek D., Lee, J., 2004" Maintenance: Changing Role in Life Cycle Management," Annals of the CIRP, Vol. 53/2, pp. 643-655.
Keynote Paper for the 53th CIRP General Assembly.(PDF Document)

32. Camelio, J., Hu, S.J., Ceglarek, D., 2004, " Impact of Fixture Design on Sheet Metal Assembly Variation," Journal of Manufacturing Systems, Vol. 23, No. 3, pp. 182-193. (PDF Document)

33. Izquierdo, Luis E. and Chiang, Luciano E., 2004, " A methodology for estimation of the specific rock energy index using corrected down-the-hole drill monitoring data", Transactions of the Institutions of Mining and Metallurgy, Section A: Mining Technology, v 113, 4, pp. A225-A236 (PDF Document)


2005
34. Ding, Y., Jin, J., Ceglarek, D., Shi, J., 2005, " Process-Oriented Tolerancing for Multi-station Assembly Systems," IIE Transactions on Design and Manufacturing, Vol. 37, No. 6, pp. 493-508.
The paper was also summarized and featured in the June 2005 edition of Industrial Engineer (formerly IIE Solutions). An early shorter version of the paper received 2000 Best Paper Award from the ASME Manufacturing Engineering Division. This award was granted to a single paper selected among all 135 papers in the area of manufacturing presented during the 2000 ASME International Mechanical Engineering Congress and Exposition in Orlando, FL.(PDF Document)

35 . Kong, Z., Huang, W., Ceglarek, D. 2005," Visibility Analysis for Assembly Fixture Calibration using Screen Space Transformation," ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 126, No.3. pp. 622-634. (PDF Document)
The paper was selected as one of the 2003 Best Paper Award Finalist, Proc. of the ASME 2003 Design Engineering Technical Conferences (DETC’03) and Computers and Information in Engineering Conference (DETC2003/DFM-48161), Chicago, September 2-6, 2003.

36. Wang, H, Ceglarek, D., 2005, "Quality-driven Sequence Planning for Compliant Structure Assemblies" Annals of CIRP, 54/1 pp.31-35.(PDF Document)



2006
37. Kong Z., Kumar, R., Gogineni, S., Zhou, Y., Ceglarek, D., 2006, " Stream of Variation Analysis for Multiple Station Assembly Process with Consideration of Various Tolerance Modes," Transactions of NAMRI, Vol. 34, pp. 469-476. (PDF Document)

38. Kawalec, A., Wiktor, J., Ceglarek, D., 2006, " Comparative Analysis of Tooth Root Strength Using ISO and AGMA Standards in Spur and Helical Gears with FEM-based Verification," ASME Trans., Journal of Mechanical Design(PDF Document)

39. Mannar, K., Ceglarek, D., Niu, F., Abifaraj, B., , 2006, " Fault Region Localization (FRL): Product and Process Improvement Based on Field Performance and Distributed Manufacturing Measurements," IEEE Trans. on Automation Science and Engineering, Vol. 3(4), pp. 423-439. (PDF Document)

40. Chen, Y., Ding, Y., Jin, J., Ceglarek, D., 2006, " Integration of Process-Oriented Tolerancing and Maintenance Planning in Design of Multi-station Manufacturing Processes," IEEE Trans. on Automation Science and Engineering, Vol. 3(4) , pp. 440 -453 .(PDF Document)

41. Lee, NKS., Yu, G., Joneja, A., Ceglarek, D., 2006, " The Modeling and Analysis of Butting Assembly in the Presence of Workpiece Surface Roughness and Part Dimensional Error," International Journal of Advanced Manufacturing Technology Vol. 31 No. 5-6, pp. 528-538 .(PDF Document)

42. Kong, Z., Ceglarek, D. 2006, " Fixture Workspace Synthesis for Reconfigurable Assembly Systems", Journal of Manufacturing Systems, Vol . 25(1), pp. 25-38. (PDF Document)

43. Kim D. , Bufardi A., Xirouchakis P., 2006, " Compatibility Measurement in Collaborative Conceptual Design", CIRP Annals, 55/1, 2006. (PDF Document)

TOP



2007
44. Loose, J-P., Zhou, S., Ceglarek D., 2007, "Kinematic Analysis of Dimensional Variation Propagation for Multistage Machining Processes with General Fixture Layouts," IEEE Transactions on Automation Science and Engineering Vol. 4(2) , pp. 141-152. (PDF Document)

45. Phoomboplab, T., Ceglarek, D., 2007, " Design Synthesis Framework for Dimensional Management in Multi-Station Assembly Systems," Annals of CIRP, 56/1, pp. 153-158 .(PDF Document)

46. Huang, W., Lin, J.,, Bezdecny M., Kong, Z., Ceglarek, D., 2007, " Stream-of-Variation Modeling I: A Generic 3D Variation Model for Rigid Body Assembly in Single Station Assembly Processes," ASME Trans. on Journal of Manufacturing Science and Engineering, Vol. 129(4) , pp. 821-831 .(PDF Document)

47. Huang, W., Lin, J., Kong, Z., Ceglarek, D., 2007, " Stream-of-Variation (SOVA) Modeling II: A Generic 3D Variation Model for Rigid Body Assembly in Multi Station Assembly Processes" ASME Trans. on Journal of Manufacturing Science and Engineering, Vol. 129(4) , pp. 832-842 .(PDF Document)

48. Almazan, J. L.; De la Llera, J. C.; Inaudi, J. A.; Lopez-Garcia, D.; Izquierdo, L. E. , 2007, "" A Bidirectional and Homogeneous Tuned Mass Damper: A New Device for Passive Control of Vibrations ," Engineering Structures, v 29, 7, pp. 1548-1560 (PDF Document)

49. Izquierdo, L. E., Shi, J., Hu, S. J., and Wampler, C. W., 2007, " ," Feedforward control of multistage assembly process using programmable tooling," Transactions of the North American Manufacturing Research Institute of SME, v 35, 2007, pp. 295-302 (PDF Document)


2008
50. Kong, Ceglarek, D., Huang, W., 2008, " Multiple Fault Diagnosis Method in Multi-station Assembly Processes Using Orthogonal Diagonalization Analysis," ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 130 No. 031014, February 2008. (PDF Document)

51. Loose, J., Zhou, S., Ceglarek, D., 2008, " Variation source identification in Manufacturing Processes Based on Relational Measurement of Key Product Characteristics," ASME Trans. on Journal of Manufacturing Science and Engineering, Vol. 130, No. 001007, June 2008. (PDF Document)

52. Phoomboplab, T., Ceglarek, D., 2008, " Process Yield Improvement through Optimal Design of Fixture Layout in 3D Multi-station Assembly Systems ," ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 130 No. 061005, December 2008. (PDF Document)

53. Li, Z., Izquierdo, L.E., Kokkolaras, M., Hu, S. J., Papalambros, P.Y., 2008, " Multiobjective optimization for integrated tolerance allocation and fixture layout design in multistation assembly," ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 130, No. 4, pp. 0445011-0445016 (PDF Document)

54. Kim D., and Xirouchakis P., 2008, " CO2DE: a Decision Support System for Collaborative Design," Journal of Engineering Design, pp. 1-18. (PDF Document)


2009
55. Huang, W., Phoomboplab, T., Ceglarek, D., 2009, " Process Capability Surrogate Model-Based Tolerance Synthesis for Multi-Station Manufacturing Systems (MMS)," IIE Trans., Vol. 41, pp. 309-322. (Supplementary materials are available for this article. Please see <Appendix).(PDF Document)

56.
Izquierdo, L. E., Hu, S. J., Du, H., Jin, R., Haeseong, J. and Shi, J., 2009 , " Robust Fixture Layout Design for a Product Family Assembled in a Multistage Reconfigurable Line ," accepted to ASME Trans., Journal of Manufacturing Science and Engineering(PDF Document)

57. Wang, H, Ceglarek, D., 2009, "Variation Propagation Modeling and Analysis at Preliminary Design Phase for Multi-station Assembly Systems,” Assembly Automation- The International Journal of Assembly Technology and Management, Vol. 29, No. 2, pp. 154-166.
The paper received 2010 Highly Commended Award from the Emerald Insight Publisher. The citation states that the paper was selected “as it was one of the most impressive pieces of work the team has seen throughout 2009.” The publishers selected 3 papers out of 71 papers published in 2009.(PDF Document)


58. Prakash, Izquierdo L. E., Ceglarek D., 2009, "Functional Process Adjustments to Reduce No-Fault-Found Product Failures in Service Caused by In-tolerance Faults," Annals of CIRP, Vol. 58, No. 1, pp. 37-40.(PDF Document)

59. Wang, H, Yang, J., Ceglarek, D., 2009, "A Graph-based Data Structure for Assembly Dimensional Variation Control at a Preliminary Phase of Product Design," International Journal of Computer Integrated Manufacturing, Vol.22, No. 10, pp. 948-961.(PDF Document)

TOP



2010

60. Mannar K., Ceglarek D., 2010, "Functional Capability Space and Optimum Process Adjustments for Manufacturing Processes with In-Specs Failures," IIE Transactions, Vol. 42, No. 2, pp. 95-106.(PDF Document)

61. Loose, J-P., Zhou, S., Ceglarek, D., 2010, "Integrating GD&T into dimensional variation models for multistage machining processes," International Journal of Production Research, Vol. 48, Issue: 11, pp. 3129-3149.(PDF Document)

62. Tolio T, Ceglarek D., ElMaraghy H.A. , Fischer A., Hu S.J., Laperrière L., Newman S.T., Váncza J., 2010, "SPECIES – Co-evolution of Products, Processes and Production Systems,” Annals of the CIRP, Vol. 59/2, pp. 672-693. Keynote Paper for the 2010 CIRP General Assembly.(PDF Document)

63. Maropoulos P.G., Ceglarek D., 2010, "Design Verification and Validation in Product Lifecycle,”Annals of the CIRP , Vol. 59/2, pp. 740-759 Keynote Paper for the 2010 CIRP General Assembly.(PDF Document)






2012
2012
64. Wang, H, Ceglarek, D., 2012, " Representation, Generation, and Analysis of Mechanical Assembly Sequences with k-ary Operation s," ASME Trans., Journal of Computing and Information Science in Engineering, Vol. 12, 011001-1. (PDF Document)
Top-1 most downloaded paper during quarter 1, 2012 at the Journal of Computing and Information Science in Engineering website.

65. Prakash, P.K.S., Tiwari M.K., Ceglarek, D., 2012, " Constraint-based Simulated Annealing (CBSA) Approach to Solve the Disassembly Scheduling Problem," International Journal of Advance Manufacturing Technology, Vol. 60, pages 1125-1137, DOI 10.1007/s00170-011-3670-2. (PDF Document)

66. Ceglarek D., Prakash, P.K.S., 2012," Enhanced Piecewise Least Squares Approach For Diagnosis of Ill-Conditioned Multi-Station Assembly," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol. 226/3, pp. 485-502, DOI: 10.1177/0954405411423458. (PDF Document)


2013

67. Shukla, N., Tiwari, M.K., Ceglarek, D., 2013 "Genetic-algorithms-based algorithm portfolio for inventory routing problem with stochastic demand," International Journal of Production Research, Vol. 51, No. 1, pp. 118-137, DOI:10.1080/00207543.2011.653010.(PDF Document)

68. Sinha, A.K., Kim, D.Y., Ceglarek, D., 2013, "Correlation Analysis of the Variation of Weld Seam and tensile Strength in Laser Welding of Galvanized Steel,”Optics and Lasers in Engineering, Optics and Lasers in Engineering. Vol. 51, pp. 1143-1152. (PDF Document)


2014

69. Huang W., Liu, J., Chalivendra, V., Ceglarek, D., Kong, Z., Zhou, Y., 2014, " Statistical Modal Analysis (SMA) for Variation Characterization and Application in Manufacturing Quality Control”, IIE Transactions,Vol.46, Issue 5, pages 497-511 (PDF Document)

70. Shukla, N., Keast, J.E., Ceglarek, D., 2014 “Modelling Variations in Hospital Service Delivery based on Real Time Locating Information,” Applied Mathematical Modelling, VVol. 116, Issue 3, pages 274-298.(PDF Document)

 

71. Shukla, N., Keast, J.E., Ceglarek, 2014, "Improved Workflow Modelling using Role Activity Diagram-based modelling with Applications to a Radiology Service Case Study," Computer Methods and Programs in Biomedicine, Vol. 116, Issue 3, pages 274-298.(PDF Document)

72 . Iqebal, A.S., Pal, A., Ceglarek, D., Tiwari, M.K., 2014 “Enhancement of Mahalanobis-Taguchi System via Rough Sets based Feature Selection,” Expert Systems with Applications, Vol. 41, pages 8003-8015.(PDF Document)

2015

73.Shukla, N., Ceglarek, D., Tiwari, M.K., 2013, "Key Characteristics-based Sensor distribution in Multi-Station Assembly Processes," Journal of Intelligent Manufacturing, Vol., pp. 1-16, (PDF Document)

74.Das, A., Franciosa, P., Ceglarek, D., 2015, “Fixture Design Optimisation Considering Batch of Compliant Non-Ideal Sheet Metal Parts,” accepted to Trans. of NAMRI, Vol. 43.

75.Franciosa, P., Ceglarek, D., 2015, “Hierarchical Optimization of Multilevel Design Parameters in Assembly System with Compliant Non-Ideal Parts,” accepted to Annals of the CIRP, Vol. 64/1.

76.Ceglarek, D., Colledani, M., Vancza, J., Kim, D-Y., Marine, C., Kogel-Hollacher, M., Mistry, A., Bolognese, L., 2015, “Rapid Deployment of Remote Laser Welding Processes in Automotive Assembly Systems,” accepted to Annals of the CIRP, Vol. 64/1

77. Shukla, N., Lahiri, S., Ceglarek, D. 2014 “Pathway Variations Analysis: Modelling and Simulations,” submitted to Computers and Industrial Engineering.

78. Prakash, Ceglarek, D., Tiwari, M.K., 2014, "Fault Failure Diagnosis for Compliant Structure Assemblies Using Statistical Modal Analysis (SMA)," submitted to T ransactions of the ASME, Journal of Computing & Information Science in Engineering. Special Issue on Advances in Computer Aided Manufacturing.

79. Mannar, K., Ceglarek, D., Choubey, S., Sivenpiper, C., 2014, "Diagnosis of Healthcare System Field Failures based on Event Logs," submitted to IIE Transactions, Special Issue on Healthcare Engineering.

80. Shukla, N., Ceglarek, D., Tiwari, M.K., 2010, "An Ant Ordered Evolutionary Bayesian Fault Diagnosis Model for Hydraulic Forging Presses," to be submitted to IEEE Transactions on Reliability.

81. Mannar, K., Ceglarek, D., Choubey, S., Sivenpiper, C., 2014, "Prognostics of Healthcare System Field Failures based on Event Logs," submitted to IIE Transactions, Special Issue on Healthcare Engineering.

82. Kong, Z., Ceglarek, D., 2014, "Fixture Workspace Synthesis for Hybrid Assembly Systems," to be submitted to IIE Trans.

83. Huang, W., Ceglarek, D., 2014, "Form Error Variational Class (FE-VC) Generator for Geometric Tolerance Analysis Using Statistical Modal Analysis (SMA)," to be submitted to ASME Trans., Journal of Mechanical Design.

84. Kong, Z., Ceglarek, D., 2014, "Reusability of Fixture Design Knowledge Analysis Using Rework Distance-based Similarity Index," to be submitted toTrans. of ASME, Journal of Mechanical Design.

85. Tsai, L., Mannar, K., Ceglarek, D., 2014, "Fault Localization in Multi-stage Manufacturing Systems," to be submitted to Journal of Manufacturing Systems.

86. Prakash, L. Eduardo Izquierdo, D. Ceglarek, 2014, "Functional Process Adjustments for No-Fault-Found Product Failure in Service Caused by In-tolerance Faults: Multi-step Adjustments Senario," to be submitted.


 

TOP