Skip to main content

Selected Refereed Conference Papers

  1. Ceglarek, D., Shi, J., Wu, S.M., 1993 "Autobody Assembly Diagnostic: A Knowledge- based Approach," ASME Winter Annual Meeting, PED-vol. 64, pp. 401-412, New Orleans, November 28 - December 3.
  2. Shi, J; Hu, S.J; Ceglarek, D, 1994 "Process Navigator for the Automobile Body Assembly Process," Proceedings of the First S.M. Wu Symposium on Manufacturing Science, pp. 325-332, Evanston, Ill, May 27-28.
  3. Ceglarek, D., Shi, J., 1995 "Model-Based Control of Dimensional Variability for Automatic Fixturing of Sheet Metal Assemblies," IV International Conference on Monitoring and Automatic Supervision in Manufacturing - AC‘95 sponsored by International Institution for Production Engineering Research (CIRP) and Polish Academy of Sciences, Warsaw, August 28-29, pp. 191- 202.
  4. Ceglarek, D., Shi, J., 1995 "Design Evaluation of Part-to-Part Joints for Dimensional Integrity of Body-in-white," International Body Engineering Conference and Exposition IBEC, Body Design and Engineering Symposium, Vol. 13, pp. 11- 19, Detroit, MI, October 31 - November 2.
  5. Ceglarek, D; Shi, J, 1997 "Tolerance analysis for sheet metal assembly using a beam-based model," ASME Design Engineering Division Publication, DE-Vol. 94, pp.153-159. (Conference: 1997 ASME International Mechanical Engineering Congress and Exposition).
  6. Ceglarek, D., 1997 "Tolerancing of Non-Rigid Assemblies: Principles and Applications," III International Conference on Computer Aided Engineering - CAE’97, Rzeszow, Poland, September 24-27, pp. 514-527.
  7. Ceglarek, D., Brahmst, E., 1998 "Impact of Part Variation on In-Process Coordinate Measurements for Automotive Body Assemblies," International Body Engineering Conference and Exposition-IBEC, Vol. 5, pp. 27- 34, Detroit, MI, October 31 – November 2.
  8. Ding, Y; Ceglarek, D; and Shi, J, 2000, "Modeling and Diagnosis of Multistage Manufacturing Processes: Part I: State Space Model," Japan/USA Symposium on Flexible Automation, July 23-26, Ann Arbor, MI.(PDF Document)
  9. Ding, Y., Ceglarek, D., Shi, J., 2000, “Modeling and Diagnostics of Multi-Station Assembly Processes: Part II – Fault Diagnostics,” 2000 Japan-USA Symposium on Flexible Automation, Ann Arbor, MI.
  10. Kong, Z., Smithson, A., Ceglarek, D., 2000 “Fixture Reconfigurability Analysis using Similarity Approach,” 2000 ASME International Mechanical Engineering Congress and Exposition, MED-Vol. 11, pp. 63-72, Orlando, FL.
  11. Ding, Y., Ceglarek, D., Jin, J., 2001, “Sensor Distribution Methodology for Multistage Manufacturing Systems,” Flexible Automation and Intelligent Manufacturing (FAIM’01), 16-18 July 2001, Dublin, Ireland.
  12. Ding, Y., Ceglarek, D., Shi, J., 2001, “Multistage Manufacturing Processes: Modeling, and Design Evaluation,” Advances in Production Engineering (APE’01), 7-9 June 2001, Warsaw.
  13. Ding, Y., Jin, J., Ceglarek, D., Shi, J., 2000, “Process-Oriented Tolerance Synthesis for Multistage Manufacturing Systems,” Proceedings of the 2000 ASME International Mechanical Engineering Congress and Exposition, MED-Vol. 11, pp. 15-22, Orlando, FL.
    The paper received the BEST PAPER AWARD by the ASME Manufacturing Engineering Division (MED). This award was granted to a single paper selected among all 135 papers in the area of manufacturing presented during the 2000 ASME International Mechanical Engineering Congress and Exposition in Orlando, FL., November.
  14. Ceglarek, D., Yu, G.H.[1], Lee, N.K.S., 2002, “Budding Assembly Accuracy in the Presence of Workpiece Surface Roughness and Dimensional Error,” Proceedings of the ASME 2002 Design Engineering Technical Conferences (DETC’02) and Computers and Information in Engineering Conference (DETC2002/DFM-34191), Montreal, Canada, September 29-October 2, 2002.
  15. Kong, Z; Ceglarek, D, 2003, "Fixture configuration synthesis for reconfigurable assembly using procrustes-based pairwise optimization," 31st North American Manufacturing Research Conference (NAMRC), Date: MAY 20-23, 2003 McMaster Univ Hamilton Canada.
  16. Mannar, K., Ceglarek, D. 2004 “Continuous Fault Diagnosis for Ramp-Up of New Manufacturing Systems,” 2004 IIE Annual Conference and Exhibition, May 15-19, Houston, Texas.
  17. Kong, Z; Kumar, R; Gogineni, S; Lin, J; Huang, W; Ceglarek, D, 2005, "Multiple fault diagnosis method in multi-station assembly processes using state space model and orthogonal diagonalization analysis," ASME International Mechanical Engineering Congress and Exposition, Date: NOV 05-11, 2005 Orlando FL.
  18. Huang, W., Ceglarek, D., 2005, “Model Complexity Reduction in Stream-of-Variation Analysis for Compliant Sheet Metal Assembly,” Proceedings of the 2005 CIRP International Seminar on Computer Aided Tolerancing, Tempe, AZ, April 10-12, 2005.
  19. Mannar K., Ceglarek, D., 2005, “Feedback-to-Design Based on Product Field Defects,” Proceedings of the 2005 CIRP International Seminar on Computer Aided Tolerancing, Tempe, AZ, April 10-12, 2005.
  20. Kong Z., Ceglarek, D., 2005, “Fixture Workspace Synthesis for Hybrid Assembly Systems,” Proceedings of the 3rd International Conference on Reconfigurable Manufacturing, Ann Arbor, MI, May 9-12, 2005.
  21. Mannar, K., Ceglarek, D., 2005 “Fault region localization (FRL): collaborative product and process improvement based on field performance,” 2005 The International Society for Optical Engineers (SPIE) Symposium on Optics East in Boston, Massachusetts, 23-26 October 2005. Paper Number: 5999-28.
  22. Shrivastava, A.K; Ding, Y; Coody, J; Niu, F, Ceglarek, D., 2006, "Modeling, Analysis and Design of Complex Quality Testing Systems using a Hierarchical Simulation Framework" Proceedings of the 2006 IEEE International Conference on Networking, Sensing and Control, 2006. ICNSC'06. pp. 691-696, April 23-25, 2006 Ft Lauderdale FL.
  23. Shukla, N., Tiwari, M.K., Ceglarek, D., 2006, “Sensor Optimization for Online Monitoring of Multi-Station Assembly Operations in Digital Manufacturing Environment",” 3rd CIRP Conference on Digital Enterprise Technology (DET), Setúbal, Portugal, September 18-20, 2006.
  24. Huang W; Lin J; Bezdecny M; Kong Z; Ceglarek D, 2006, "Stream-of-variation modeling - Part I: A Generic three-dimensional variation model for rigid-body assembly in single station assembly processes," International Conference on Manufacturing Science and Engineering, Date: OCT 08-11, 2006 Ypsilanti MI.
  25. Ceglarek, D., Prakash, PKS., Tripathi, A., and Kong, Z., 2007, “Diagnosis of Product Failures in Ill-conditioned Multi-station Assembly System using Enhanced piecewise Least Squares Method,” 40th International Conference on Manufacturing Systems, Liverpool, UK, May 30- June 2, 2007.
  26. Mannar, K., Ceglarek, D., 2007, “Functional Capability Space and Optimum Process Adjustments for Manufacturing Processes with In-Specs Failure,” 40th International Conference on Manufacturing Systems, Liverpool, UK, May 30- June 2, 2007.
  27. Wang, H; Ceglarek, D, 2007, "Generation of assembly sequences with k-ary operations," IEEE International Symposium on Assembly and Manufacturing, Date: JUL 22-25, 2007 Ann Arbor MI.
  28. Shukla, N., Tiwari, M.K., Ceglarek, D., 2007, “Fault Diagnosis in Multi-station Assembly System using an Agent-based Simulation Model (ABSM),” 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production, Windsor, Canada, July 22-24, 2007.
  29. Tsai, P; Mannar, K; Ceglarek, D, 2007, "Fault localization analysis for multiple fault diagnosis in multistation assembly systems," ASME International Conference on Manufacturing Science and Engineering, Date: OCT 15-18, 2007 Atlanta GA.
  30. Phoomboplab, T., Ceglarek, D., 2007, “Optimum Fixture Layout Design in Multi-station Assembly Processes using Genetic Algorithm Selection and Hammersley Sequence Sampling Method,” ASME Manufacturing Science and Engineering Conference, Atlanta, GA, USA, October 15-18, 2007.
  31. Phoomboplab, T., Ceglarek, D., 2007, “Geometric Constraint and Variation Propagation Model in Multi-stage Assembly Systems with Part-to-part Joints and General 3D Fixture Layouts,” 2008 CIRP Design Conference: Design Synthesis, April 7-9, 2008, Enschede, Holland.
  32. Phoomboplab, T; Ceglarek, D, 2007, "Process yield improvement through optimum design of fixture layouts in 3D multi-station assembly systems," ASME International Conference on Manufacturing Science and Engineering, Date: OCT 15-18, 2007 Atlanta GA.
  33. Ceglarek, D., Prakash, Phoomboplab, Izquierdo L. E., 2009, "Self-Resilient Production Systems: Going Beyong Design Robustness,"
    Keynote paper for the 2009 CIRP International Computer-Aided Tolerance Conference, March 26-27, Annecy, France.
  34. Izquierdo E., Zhong J., Shi J., and Hu Jack S., 2009, "Feasibility of Automatic Dimensional Control in Assembly using Part-by-Part Control," published in The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, UK, September 8-10 2009.
  35. Prakash, Ceglarek D., and Tiwari M. K., 2009, "Constraint Based Fast Simulated Annealing (CBFSA) Approach to Solve the Disassembly Scheduling Problem," published in The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, UK, September 8-10 2009.
  36. Prakash, and Ceglarek D.,2009, "Process Adjustment to Eliminate Fixture Failure Root Causes in Multi-station Assembly System for Multiple Products," published in The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, UK, September 8-10 2009.
  37. Shukla N., Ceglarek D., and Tiwari M. K., 2009, "Feature-based Optimal Sensor Distribution for Six-sigma Variation Diagnosis in Multi-Station Assembly Processes ," published in The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, UK, September 8-10 2009.
  38. Shukla N., Keast John E., Ceglarek Sudi L., Ceglarek D., 2009, "Role Activity Diagram-Based Workflow Modelling of Imaging Service Delivery Process in Radiology," INFORMS Service Science Conference, HKUST, Hong Kong, (2009).
  39. Phoomboplab, T., and Ceglarek, D., 2011, “AutoSOVA Model Generator: Automatic Generator of Variation Prediction Model for Multi-stage Assembly Systems with General 3D Fixture Layout”, Proceedings of 2nd CIRP Conference on Assembly Technologies and Systems, Toronto, Canada, 21-23 September 2009.
  40. Pal, A., Ceglarek, D., 2013, “Modeling of Decision Making Process for Product Service Failure Diagnostics,” Procedia CIRP, Vol. 11, pp. 32-37, also in 2nd International Through-Life Engineering Service Conference, October 5-6, Cranfield University, Milton Keynes, UK.
  41. Prakash, P.K.S., Ceglarek, D., 2013, “Multi-Step Functional Process Adjustments to Reduce No-Fault-Found Product Failures in Service Caused by In-tolerance Faults,” Procedia CIRP, Vol. 11, pp. 38-43, also in 2nd International Through-Life Engineering Service Conference, October 5-6, Cranfield University, Milton Keynes, UK.
  42. Shrouti, C., Franciosa, P., Ceglarek, D., 2013, “Root Cause Analysis of product Service Failure using Computer Experimentation Technique,” Procedia CIRP, Vol. 11, pp. 44-49, also in 2nd International Through-Life Engineering Service Conference, October 5-6, Cranfield University, Milton Keynes, UK
  43. Puik, E., Telgen, D., van Moergestel, L., Ceglarek, D., "Structured Analysis of Reconfigurable Manufacturing System",

    Advances in Sustainable and Competitive Manufacturing Systems, Lecture Notes in Mechanical Engineering, 147-157; also presented during the 23rd International Conference Flexible Automation and Intelligence Manufacturing (FAIM), June 26-28, Porto, Portugal.

  44. Puik, E., Smulders, E., Ceglarek, D., 2013, “A Method for Indexing Axiomatic Independence in Reconfigurable Manufacturing Systems,” Proceedings of the 7thInternational Conference on Axiomatic Design (ICAD), June 27-28, Worcester, MA, USA.
  45. Puik, E., Telgen, D., van Moergestel, L., Ceglarek, D., 2013, “Qualitative Modeling of Reconfigurable Manufacturing Systems,” 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), July 30-August 2, Xian, China..
  46. Das, A., Franciosa, P., Prakash, P.K.S., Ceglarek, D., 2014, “Transfer Function of Assembly Process with Compliant Non-ideal Parts,” 24th CIRP Design Conference, April 14-16, Milano, Italy.
  47. Pal, A., Franciosa, P., Ceglarek, D., 2014, “Root Cause Analysis of Product Service Failures in Design -A Closed-loop Lifecycle Modelling Approach,” 24th CIRP Design Conference, April 14-16, Milano, Italy.
  48. Agyapong-Kodua, K., Asare, K.B., Ceglarek, D., 2014, “Digital Modelling Methodology for Effective Cost Assessment,” Variety Management in Manufacturing, Proceedings of the 47th CIRP Conference on Manufacturing Systems, April 28-30, Windsor, Canada.
  49. Pal, A., Franciosa, Ceglarek, D., 2014, “Corrective Actions of Product Service Failures via Surrogate Modelling of Dimensional Variations,” Industrial & Systems Engineering Research Conference, IIE Annual Conference & Expo, May 31-June 3, Montreal, Canada.
  50. Franciosa, P., Das, A., Ceglarek, D., Bolognese, L., Marine, C., Mistry, A., 2014, “Design Synthesis Methodology for Dimensional Management of Assembly Process with Compliant non-Ideal Parts,” 2014 International Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, June 18-20, Toulouse, France

    Paper received BEST PAPER AWARD at the 2014 International Joint Conference on Mechanical, Design Engineering and Advanced Manufacturing held in Toulouse, France. The conference is organized jointly by AIP - PRIMECA (Ateliers Inter-établissements de Productique - Pôles de Ressources Informatiques pour la MECAnique) network from France; ADM (Associazione Nazionale Disegno di Macchine), Italy; and INGEGRAF (Asociación Española de Ingeniería Gráfica) from Spain. A total of 95 papers were presented during the conference.
  51. Puik, E. and Ceglarek, D., 2014, “A Method to Monitor Maturity during the Design Process based on Axiomatic Design Principles,” Proceedings of the 8th International Conference on Axiomatic Design (ICAD), September 24-26, Campus de Caparica, Portugal.

    The paper was invited as a Book Chapter, which will be part of Section on: “Theoretical Developments in Axiomatic Design” of the Book titled “Axiomatic Design Principles and Application” to be published by Elsevier Publisher, Eds. Amro M Farid, Christopher A. Brown, Miguel Cavique, Antonio M Goncalves Coelho, and Nam P Suh.
  52. Puik, E. and Ceglarek, D., 2014, “The Main Axiom: A Novel Perspective on the Information and Complexity Axioms,” Proceedings of the 8th International Conference on Axiomatic Design (ICAD), September 24-26, Campus de Caparica, Portugal.

  53. Puik, E., Telgen, D., van Moergestel, L., Ceglarek, D., 2014, “Classification of Reconfiguration Resources and Lead-Time for Reconfigurable Manufacturing Systems,” 23rd International Conference Flexible Automation and Intelligence Manufacturing (FAIM), May 20-23, San Antonio, TX, USA.

  54. Puik, E., Gielen, D., Telgen, D., van Moergestel, L., Ceglarek, D., 2014, “A Generic Systems Engineering Method for Concurrent Development of Products and Manufacturing Equipment,” 7th International Precision Assembly Seminar (IPAS), February 16-18, Chamonix, France.

  55. Puik, E., Ceglarek, D., 2014, “A Constituent Roadmap for Product Design Based on Axiomatic Information,” ASME International Mechanical Engineering Congress and Exposition (IMECE), November 13-19, Houston, TX, USA.

  56. Franciosa, P., Gerbino, S., Ceglarek, D., 2015, “Improvement of Fixture Capability for Batch of Non-Ideal Compliant Sheet Metal parts using Nested Polynomial Chaos Expansion,” 48th CIRP Conference on Manufacturing Systems (CIRP-CMS), June 24-26, Ischia, Naples, Italy.