IDG » News - Network Printing Service (tag [LightTouch Digital Filing])

Provision of new and rationalisation of existing Kyocera MFDs across the Managed Print Service

Thu, 30 Nov 2023 14:56:00 GMT

As part of our continued drive to modernise and improve the service we will be carrying out an upgrade to 230 (109x A3 and 121x A4) devices within the Managed Print Service (MPS) fleet across campus from the 18th December onwards.

During this process we will also be removing and retiring existing MFDs based upon two key factors:

The ongoing financial cost to provide the service
The reduced volumes being produced with customer's and colleagues WFH and operating in a far more digital focused environment

This is in direct response to changing patterns of usage within the print environment at Warwick and the wider print industry.

We apologise for any inconvenience this may cause.

We will of course closely monitor print volumes and device reliability patterns and can look to reinstate devices as and when deemed absolutely necessary.

This does remain a judgement call for the Managed Print Service (MPS).

The service is provided free at the point of use and has no recharge activities taking place on a quarterly basis for all departments apart from the WSU.

We welcome the opportunity to discuss this policy with all of our colleagues and customers on a case by case basis as needed.

The benefits to our staff and student customers of the newer devices of these planned works will include:

More modern and reliable - fewer jams
Faster print times - less waiting for your jobs
Higher quality/resolution print output - better quality printed documents
Enhanced transparency sheet print capabilities - deeper black production and better defined text output
Higher toner yields - fewer cartridge orders, less plastic waste, fewer toner deliveries
Reduced diversity of toner cartridges - less complexity, less confusion and a much simpler supply and support model
Reduced plastic waste - using the empty black cartridge as a fresh waste box and lower energy consumption
Larger, more sensitive and responsive touchscreens - easier to use and more accessible
The use of encrypted hard disks and walk up, wake up presence sensors - more secure and faster to use
Smaller physical footprint - saving valuable office space
The retirement of slower, older, energy hungry legacy MFDs - improved operational efficiency
The retirement of legacy Push Print queues associated with HP and Kyocera Managed Print Devices - helping to ensure GDPR compliance
The removal of lower volume or unused legacy devices - improved operational efficiency and reduced energy consumption
The retirement of legacy analogue technologies such as fax will also take place - reduced line rental and device costs
Enhanced remote management and device status/health monitoring - improved support and fault resolution

Customers will typically find that the process to remove and replace their MFD will take around 15 minutes from arrival to the new device being ready for use.

The existing Pull Print queues, drivers and embedded applications will remain operational and only minor differences to the user interface on the new devices will be seen.

The project is expected to start from the 18th December 2023 and run for an initial 3 month period.

Communication to local departments will be handled on a case by case basis as and when it is deemed absolutely necessary.

We expect disruption to our customers to be kept to an absolute minimum.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

Provision of new and rationalisation of existing Kyocera MFDs across the Managed Print Service

Mon, 22 Nov 2021 15:54:00 GMT

As part of our continued drive to modernise and improve the service we will be carrying out an upgrade to 214 (184x A3 and 30x A4) devices within the Managed Print Service (MPS) fleet across campus from the 1st December onwards.

During this process we will also be removing and retiring existing MFDs based upon two key factors:

The ongoing financial cost to provide the service
The unprecedented low volumes being produced with customer's and colleagues WFH and operating in a far more digital focused environment

This is in direct response to the Covid pandemic and the changing patterns of usage within the print environment at Warwick and the wider print industry.

We apologise for any inconvenience this may cause.

We will of course closely monitor print volumes and device reliability patterns and can look to reinstate devices as and when deemed absolutely necessary.

This does remain a judgement call for the Managed Print Service (MPS).

The service is provided free at the point of use and has no recharge activities taking place on a quarterly basis for all departments apart from the WSU.

We welcome the opportunity to discuss this policy with all of our colleagues and customers on a case by case basis as needed.

The benefits to our staff and student customers of the newer devices of these planned works will include:

More modern and reliable - fewer jams
Faster print times - less waiting for your jobs
Higher quality/resolution print output - better quality printed documents
Enhanced transparency sheet print capabilities - deeper black production and better defined text output
Higher toner yields - fewer cartridge orders, less plastic waste, fewer toner deliveries
Reduced diversity of toner cartridges - less complexity, less confusion and a much simpler supply and support model
Reduced plastic waste - using the empty black cartridge as a fresh waste box and lower energy consumption
Larger, more sensitive and responsive touchscreens - easier to use and more accessible
The use of encrypted hard disks and walk up, wake up presence sensors - more secure and faster to use
Smaller physical footprint - saving valuable office space
The retirement of slower, older, energy hungry legacy MFDs - improved operational efficiency
The retirement of legacy Push Print queues associated with HP and Kyocera Managed Print Devices - helping to ensure GDPR compliance
The removal of lower volume or unused legacy devices - improved operational efficiency and reduced energy consumption
The retirement of legacy analogue technologies such as fax will also take place - reduced line rental and device costs
Enhanced remote management and device status/health monitoring - improved support and fault resolution

Customers will typically find that the process to remove and replace their MFD will take around 15 minutes from arrival to the new device being ready for use.

The existing Pull Print queues, drivers and embedded applications will remain operational and only minor differences to the user interface on the new devices will be seen.

The project is expected to start from the 1st December 2021 and run for an initial 3 month period.

Communication to local departments will be handled on a case by case basis as and when it is deemed absolutely necessary.

We expect disruption to our customers to be kept to an absolute minimum.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

Light Touch Digital Filing (Scan to Folder) Outage - Tuesday 6th July

Mon, 21 Jun 2021 11:41:00 GMT

On Tuesday 6th July, between 08:00 - 10:00, we will be carrying out a server upgrade on the LightTouch Digital Filing (Scan to folder) service, as such the service should be considered at risk / offline for the period of upgrade.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

What will be affected and unavailable during this downtime?

The Scan to folder option from compatible Kyocera MFDs