2015

• Barai, Anup, Chouchelamane, Gael H., Guo, Yue, McGordon, Andrew and Jennings, P. A. (2015) A study on the impact of lithium-ion cell relaxation on electrochemical impedance spectroscopy. Journal of Power Sources, Volume 280 . pp. 74-80.
• Hooper, James Michael and Marco, James. (2015) Experimental modal analysis of lithium-ion pouch cells. Journal of Power Sources, Volume 286 pp. 247-259.
• Barai, Anup, Widanage, Widanalage Dhammika, Marco, James, McGordon, Andrew and Jennings, P. A. (2015) A study of the open circuit voltage characterization technique and hysteresis assessment of lithium-ion cells. Journal of Power Sources, Volume 295 pp. 99-107.
• Marco, James, Kumari, Neelu, Widanage, Widanalage Dhammika and Jones, P. (2015) A cell-in-the-loop approach to systems modelling and simulation of energy storage systems. Energies, 8 (8). pp. 8244-8262.
• Wong, Chup Chung, Siu, Wan-Chi, Barnes, Stuart and Jennings , Paul A. (2015) Low relative speed moving vehicle detection using motion vectors and generic line features. Published in: 2015 IEEE International Conference on Consumer Electronics (ICCE), pp. 208-209.
• Birrell, Stewart A., Wilson, Daniel, Yang, C. P., Dhadyalla, Gunwant and Jennings, P. A. (2015) How driver behaviour and parking alignment affects inductive charging systems for electric vehicles. Transportation Research Part C : Emerging Technologies . pp. 1-11.
• Shojaei, Sina, Robinson, Simon, Chatham, Chris, McGordon, Andrew and Marco, James (2015) Modelling the electric air conditioning system in a commercially available vehicle for energy management optimisation. In: SAE 2015 World Congress & Exhibition, Detroit, Michigan, USA, 21-23 Apr 2015.
• Uddin, Kotub, Perera, Surak, Widanage, Widanalage Dhammika and Marco, James (2015) Characterising Li-ion battery degradation through the identification of perturbations in electrochemical battery models. In: Electric Vehicle Symposium 28 (EVS28), Goyang, Korea, 3-5 May 2015
• Taylor, James, Ball, Robert, McGordon, Andrew and Marco, James (2015) Sizing tool for rapid optimisation of pack configuration at early-stage automotive product development. In: Electric Vehicle Symposium 28 (EVS28), Goyang, Korea, 3-6 May 2015
• Khastgir, Siddartha, Birrell, Stewart A., Dhadyalla, Gunwant and Jennings, P. A. (2015) Development of a drive-in driver-in-loop fully immersive driving simulator for virtual validation of automotive systems. In: IEEE 81st Vehicular Technology Conference, Glasgow, 11–14 May 2015
• Abbott, M., Birrell, Stewart A., Pin Yang, C., Dhadyalla, Gunwant and Jennings, P. A. (2015) Enhanced logged telematics data for an electric vehicle : beyond conventional powertrain. In: Sustainable Vehicle Technologies – SVT 2015 Conference, University of Warwick, 16-17 Jun 2015
• Khastgir, S., Birrell, Stewart A., Dhadyalla, Gunwant and Jennings, P. A. (2015) Identifying a gap in existing validation methodologies for intelligent automotive systems : introducing the 3xD simulator. In: IEEE Intelligent Vehicle Symposium, Seoul, Korea, 28 Jun – 1 Jul 2015
• Bruen, Thomas, Marco, James and Gama, Miguel (2015) Model based design of balancing systems for electric vehicle battery packs. In: IFAC Workshop on Engine and Powertrain Control, Simulation and Modelling, Ohio, USA, 23-26 Aug 2015 pp. 1-8.
• Khastgir, S., Birrell, Stewart A., Dhadyalla, Gunwant, Fulker, D. and Jennings, P. A. (2015) A drive-in, driver-in-loop simulator for testing autonomous vehicles. In: DSC 2015 Europe – Driving Simulator Conference and Exhibition, Tübingen, Germany, 16-18 Sep 2015

2014

• Hooper, James Michael and Marco, James. (2014) Characterising the in-vehicle vibration inputs to the high voltage battery of an electric vehicle. Journal of Power Sources, Volume 245 (Number 1). 510 - 519.
• Roy, Hillol K., McGordon, Andrew and Jennings, P. A. (2014) A generalized powertrain design optimization methodology to reduce fuel economy variability in hybrid electric vehicles. IEEE Transactions on Vehicular Technology, Volume 63 (Number 3). pp. 1055-1070.
• Birrell, Stewart A., Fowkes, Mark and Jennings, P. A. (2014) Effect of using an in-vehicle smart driving aid on real-world driver performance. IEEE Transactions on Intelligent Transportation Systems, Volume 15 (Number 4). pp. 1801-1810. ISSN 1524-9050
• Birrell, Stewart A., Taylor, J. E. (James E.), McGordon, Andrew, Son, Joonwoo and Jennings, P. A. (2014) Analysis of three independent real-world driving studies : a data driven and expert analysis approach to determining parameters affecting fuel economy. Transportation Research Part D: Transport and Environment , Volume 33 . pp. 74-86.
• Uddin, Kotub, Picarelli, Alessandro, Lyness, Christopher , Taylor, Nigel and Marco, James. (2014) An acausal Li-ion battery pack model for automotive applications. Energies, Volume 7 (Number 9). pp. 5675-5700.
• Singh, Sneha, Payne, Sarah R. and Jennings, Paul A.. (2014) Toward a methodology for assessing electric vehicle exterior sounds. IEEE Transactions on Intelligent Transportation Systems, Volume 15 (Number 4). pp. 1790-1800.
• Mouzakitis, Alexandros, Jennings, P. A., Dhadyalla, Gunwant and Lancaster, Gerard (2014) A pragmatic model-based product engineering process. In: SAE 2014 World Congress & Exhibition, Detroit, Michigan, USA, April 8-10 2014. Published in: SAE Technical Collection, Model-Based Design and In-Vehicle Software, 2014
• Barai, Anup, Guo, Yue, McGordon, Andrew and Jennings, P. A. (Paul A.) (2014) An exploration of Li-ion cell relaxation using EIS. In: FISITA world automotive congress, Maastricht, Netherlands, 2-6 Jun 2014
• McGordon, Andrew, Birrell, Stewart A., Poxon, John E. W. and Jennings, P. A. (2014) Comparison of fuel economy over different drive cycles each having the same average speed. In: 5th International Conference on Applied Human Factors and Ergonomics, Krakow, Poland, 19-23 Jul 2014. Published in: Advances in Human Aspects of Transportation : Part III pp. 259-267.
• Birrell, Stewart A., Wilson, Daniel, Dhadyalla, Gunwant, Yang, C. P., McGordon, Andrew and Jennings, P. A. (2014) Parking behaviors for inductive charging. In: 5th International Conference on Applied Human Factors and Ergonomics, Krakow, Poland, 19-23 Jul 2014. Published in: Advances in Human Aspects of Transportation : Part II, Volume 8 of Advances in Human Factors and Ergonomics 2014 pp. 224-235.
• Birrell, Stewart A., McGordon , A. and Jennings, P. A. (2014) Defining the accuracy of real-world range estimations of an electric vehicle. In: 17th International Conference on Intelligent Transportation Systems (ITSC 2014), Qingdao, China, 8-11 Oct 2014. Published in: Proceedings of the Intelligent Transportation Systems (ITSC), 2014 IEEE 17th International Conference 2590 -2595.
• Bruen, Thomas, Marco, James and Gama, Miguel (2014) Current variation in parallelized energy storage systems. In: Vehicle Power and Propulsion Conference 2014 (VPPC 2014), Portugal, 27-30 Oct 2014. Published in: Proceedings of the 10th Vehicle Power and Propulsion Conference 2014 pp. 1-6.
• Tripathy, Yashraj, Marco, James, McGordon, Andrew and Gama-Valdez , Miguel (2014) State-of-charge estimation algorithms and their implications on cells in paralle. In: IEEE International Electric Vehicle Conference 2014, Florence, Italy, 17–19 Dec 2014. Published in: Proceedings of the IEEE International Electric Vehicle Conference 2014

2013

• Birrell, Stewart A., Young, Mark S. and Weldon, Alex M.. (2013) Vibrotactile pedals : provision of haptic feedback to support economical driving. Ergonomics, Vol.56 (No.2). pp. 282-292. ISSN 0014-0139
• Becci, Graciela, Dhadyalla, Gunwant, Mouzakitis, Alexandros, Marco, James and Moore, Andrew David (2013) Robustness testing of real-time automotive systems using sequence covering arrays. In: SAE 2013 World Congress & Exhibition, Detroit, Michigan, United States, 16 Apr 2013. Published in: SAE Technical Papers, Volume 6 (Number 1). pp. 287-293.
• Shankar, R. and Marco, James (2013) A method for estimating the energy consumption of electric vehicles and plug-in hybrid electric vehicles under real-world driving conditions. IET Intelligent Transport Systems . pp. 1-13. ISSN 1751-956X (Submitted)
• Bartlett, Philip N., Pletcher, Derek, Esterle, Thomas F. and Low, John C. T. . (2013) The deposition of mesoporous Ni/Co alloy using cetyltrimethylammonium bromide as the surfactant in the lyotropic liquid crystalline phase bath. Journal of Electroanalytical Chemistry, Volume 688 . pp. 232-236. ISSN 1572-6657
• Birrell, Stewart A., Fowkes, Mark and Jennings, P. A. (2013) A smart driving smartphone application : real-world effects on driving performance and glance behaviours. In: 3rd International Conference on Driver Distraction and Inattention, Gothenburg, Sweden, Sept 4-6
• Birrell, Stewart A., Jennings , Paul A. and Tanty, A. (2013) The usability of on-street charging posts. In: 4th Hybrid and Electric Vehicles Conference 2013 (HEVC 2013), London, UK, 06 Nov 2013. Published in: HEVC 2013 : 4th Hybrid and Electric Vehicles Conference
• Shah, Raja Mazuir Bin Raja Ahsan, McGordon, Andrew, Amor-Segan, Mark and Jennings, P. A. (2013) Micro gas turbine range extender : validation techniques for automotive applications. In: 4th Hybrid Electric Vehicle Conference (HEVC 2013), London, United Kingdom, 6-7 Nov 2013. Published in: HEVC 2013 : 4th Hybrid and Electric Vehicles Conference.
• Barai, Anup, Guo, Yue, McGordon, Andrew and Jennings, P. A. (Paul A.) (2013) A study of the effects of external pressure on the electrical performance of a lithium-ion pouch cell. In: 2013 International Conference on Connected Vehicles and Expo (ICCVE), Las Vegas, USA, 2-6 Dec 2013. Published in: 2013 International Conference on Connected Vehicles and Expo (ICCVE) 295- 299.

2012

• Cheng, C., McGordon, Andrew, Jones, R. Peter and Jennings, P. A.. (2012) Development of a comprehensive and flexible forward dynamic powertrain simulation tool for various hybrid electric vehicle architectures. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.226 (No.3). pp. 385-398. ISSN 0954-4070
• Bin Raja Ahsan Shah, Raja Mazuir, Jones, R. Peter and Pawar, Jasjit. (2012) System modelling and analysis of the driveability response of 4WD vehicle. International Review of Mechanical Engineering (I.RE.M.E.), Vol.6 (No.3). pp. 595-601. ISSN 1970 - 8734
• Quigley, C., Jones, R. Peter, McMurran, R. and Faithfull, P.. (2012) Microcontroller memory capability assessment and variant selection for reducing the cost of mechatronics. International Journal of Vehicle Design, Vol. 60 (No. 3/4). p. 248. ISSN 0143-3369
• Bin Raja Ahsan Shah, Raja Mazuir, Cheng, Caizhen, Jones, R. Peter and Pawar, Jasjit (2012) Shuffle frequency migration of 4WD vehicle. In: Regional Conference on Automotive Research, Kuala Lumpur, Malaysia, 14-15 Dec 2011 (No.P023).
• Shankar, R. (Ravi), Marco, James and Assadian, Francis. (2012) The novel application of optimization and charge blended energy management control for component downsizing within a plug-in hybrid electric vehicle. Energies, Vol.5 (No.12). pp. 4892-4923. ISSN 1996-1073
• Antaloae, Ciprian, Marco, James and Assadian, Francis. (2012) A novel method for the parameterization of a li-ion cell model for EV/HEV control applications. IEEE Transactions on Vehicular Technology, Vol.61 (No.9). pp. 3881-3892. ISSN 0018-9545
• Harrington, C. M., Marco, James and Vaughan, N. D.. (2012) The design of a reference control architecture to support vehicle hybridisation. International Journal of Vehicle Design, Vol.60 (No.3/4). pp. 206-224. ISSN 0143-3369
• Othaganont, P., Assadian, Francis and Marco, James (2012) Battery electric vehicle powertrain simulation to optimise range and performance. In: Powertrain Modelling and Control, University of Bradford, UK, 4-6 Sep 2012
• Harrington, C., Marco, James and Vaughan, N. D. (2012) Definition of a set of reusable reference architectures for hybrid vehicle development. In: Powertrain Modelling and Control, University of Bradford, UK, 4-6 Sep 2012
• Marco, James and Vaughan, Nicholas D.. (2012) Design of a reference control architecture for the energy management of electric vehicles. International Journal of Vehicle Design, Vol.58 (No.2/3/4). pp. 240-265. ISSN 0143-3369
• Shankar, Ravi, Marco, James and Assadian, Francis (2012) Design of an optimized charge-blended energy management strategy for a plugin hybrid vehicle. In: 2012 UKACC International Conference on Control (CONTROL), Cardiff, 3-5 Sep 2012 pp. 619-624.
• Mohan, G., Assadian, Francis and Marco, James (2012) Influence of cost function on EV powertrain sizing. In: Powertrain Modelling and Control, University of Bradford, UK, 4-6 Sep 2012
• Poeti, Leonardo, Marco, James and Vaughan, Nicholas D.. (2012) Modelling methodology and considerations for a more integrated exploration of HEV designs. International Journal of Vehicle Systems Modelling and Testing, Vol.7 (No.3). pp. 235-267. ISSN 1745-6436
• Shankar, Ravi, Marco, James and Assadian, Francis (2012) A methodology to determine drivetrain efficiency based on external environment. In: 2012 IEEE International Electric Vehicle Conference (IEVC), Greenville, SC, 4-8 March 2012. Published in: Proceedings of the IEEE International Electric Vehicle Conference pp. 1-6.
• Padmarajan, Brahmadevan V., McGordon, Andrew and Jennings, Paul A. (2012) An investigation on the effect of driver style and driving events on energy demand of a PHEV. In: EVS26 Los Angeles, California, May 6-9, 2012, Los Angeles, California, USA., 2012

2011

• Giudice, Sebastiano D., Jennings, P. A., Cain, Rebecca, Humphreys, Louise and Song, W. (2011) Perceptual dimensions for electric vehicle sound quality. In: 39th International Congress and Exposition on Noise Control Engineering, Lisbon, Portugal, Jun 13-16, 2010. Published in: Proceedings of the 39th International Congress and Exposition on Noise Control Engineering, Vol.9 pp. 7012-7021.
• Antaloae, Ciprian C., Marco, James and Vaughan, Nicholas D.. (2011) Feasibility of high-frequency alternating current power for motor auxiliary loads in vehicles. IEEE Transactions on Vehicular Technology, Vol.60 (No.2). pp. 390-405. ISSN 0018-9545
• Marco, James and Vaughan, Nicholas D.. (2011) Architectural modelling of an energy management control system using the SysML. International Journal of Vehicle Design, Vol.55 (No.1). pp. 1-22. ISSN 0143-3369
• Amor-Segan, Mark and Jones, R. Peter (2011) A framework for health monitoring of automotive electrical and electronic control systems (poster). In: 2011 IEEE Vehicular Networking Conference, VNC 2011, Amsterdam, 14-16 Nov 2011. Published in: IEEE Vehicular Networking Conference, VNC pp. 177-184.
• Marco, James (2011) EV development : advances in modelling, control and data analysis. In: UK-Singapore Partners in Science Electric Vehicles Symposium, National University of Singapore, Singapore, 17th-18th February 2011
• Shankar, Ravi, Marco, James and Carroll, S. (2011) Performance of an electric vehicle during real-world usage. In: Cenex Hybrid Electric Vehicles Conference 2011, University of Warwick, 18th-19th May
• Suwatthikul, Jittiwut, McMurran, Ross and Jones, R. P.. (2011) In-vehicle network level fault diagnostics using fuzzy inference systems. Applied Soft Computing, Vol.11 (No.4). pp. 3709-3719. ISSN 1568-4946
• McGordon, Andrew, Poxon, John E. W., Cheng, Caizhen, Jones, R. Peter and Jennings, P. A.. (2011) Development of a driver model to study the effects of real-world driver behaviour on the fuel consumption. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.225 (No.11). pp. 1518-1530. ISSN 0954-4070
• Bin Raja Ahsan Shah, Raja Mazuir, Cheng, Caizhen, Jones, R. Peter and Pawar, Jasjit (2011) Modelling of 4WD vehicle driveability during tip-in/tip-out events. In: 22nd International Symposium on Dynamics of Vehicle on Road and Tracks (IAVSD), Manchester Metropolitan University, Manchester, UK, 14-19 Aug 2011. Published in: Proceedings of the 22nd IAVSD Symposium (No.85).
• Leung, P. K., Ponce-de-León, C., Low, John C. T., Shah, A. A. and Walsh, F. C.. (2011) Characterization of a zinc–cerium flow battery. Journal of Power Sources, Vol.196 (No.11). pp. 5174-5185. ISSN 0378-7753

2010

• Huang, Yingping, McMurran, Ross, Amor-Segan, Mark, Dhadyalla, Gunwant, Jones, R. Peter, Bennett, Peter, Mouzakitis, Alexandros and Kieloch, Jan. (2010) Development of an automated testing system for vehicle infotainment system. International Journal of Advanced Manufacturing Technology, Vol.51 (No.1-4). pp. 233-246. ISSN 0268-3768
• Meegahawatte, Danushka, Hillmansen, Stuart, Roberts, Clive, Falco, Marco, McGordon, Andrew and Jennings, Paul (2010) Analysis of a fuel cell hybrid commuter railway vehicle. In: Spring Meeting of the European-Materials-Research-Society, Strasbourg, FRANCE, JUN 08-12, 2009. Published in: Journal of Power Sources, Vol.195 (No.23). pp. 7829-7837.
• Giudice, Sebastiano D., Humphreys, Louise, Jennings, P. A., Cain, Rebecca, Dunne, Garry and Allman-Ward, Mark (2010) Capturing driver profiles and behaviour during on-road assessments of vehicle sound quality. In: 38th International Congress and Exposition on Noise Control Engineering, Ottawa, Ontario, Canada, Aug 23-26, 2009. Published in: Proceedings of the 38th International Congress and Exposition on Noise Control Engineering, Vol.7 pp. 4721-4729.
• Antaloae, Ciprian, Vaughan, Nicholas D. and Marco, James. (2010) Investigation of high frequency AC power distribution benefits for the automobile auxiliary electrical system. SAE International Journal of Passenger Cars- Electronic and Electrical Systems, Vol.3 (No.1). pp. 109-121. ISSN 1946-4622
• Poeti, L., Marco, James and Vaughan, N. D. (2010) HEV energy storage evaluation using an object-oriented modelling methodology. In: 10th International IFAC Symposium on Advanced Vehicle Control (AVEC 2010), Loughborough University, August 2010
• Antaloae, C., Marco, James and Vaughan, N. D. (2010) High frequency alternating current power supply for automobile auxiliary electrical systems. In: 2010 International Symposium on Power Electronics Electrical Drives Automation and Motion (SPEEDAM), Pisa, Italy, 14-16 June 2010 pp. 1670-1675.
• Marco, James and Vaughan, N. D. (2010) Integration of architectural modelling using the SysML within the traditional automotive CACSD process. In: UKACC International Conference on Control 2010, Coventry, 7-10 Sept 2010 pp. 668-673.
• Standley, Gabriel, Marco, James and Cho, Baekhyun. (2010) The impact of vehicle usage and recharging infrastructure on the energy storage requirements of a plug-in hybrid electric vehicle. International Journal of Electric and Hybrid Vehicles, Vol.2 (No.3). pp. 222-239. ISSN 1751-4088
• Cheng, Caizhen, McGordon, Andrew, Jones, R. Peter and Jennings, P. A. (2010) Comprehensive forward dynamic HEV powertrain modelling using dymola and MATLAB/Simulink. In: 6th IFAC Symposium "Advances in Automotive Control", Munich, Germany, Jul 12-14, 2010. Published in: Proceedings of the 6th IFAC Symposium "Advances in Automotive Control" pp. 536-541.
• Jennings, P. A., Dunne, G., Williams, R. and Giudice, Sebastiano D.. (2010) Tools and techniques for understanding the fundamentals of automotive sound quality. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.224 (No.10). pp. 1263-1278. ISSN 0954-4070
• Sirés, I., Low, John C. T., Ponce-de-León, C. and Walsh, F.C.. (2010) The characterisation of PbO2-coated electrodes prepared from aqueous methanesulfonic acid under controlled deposition conditions. Electrochimica Acta, Volume 55 (Number 6). pp. 2163-2172. ISSN 0013-4686

2009

• Huang, Yingping, McMurran, Ross, Dhadyalla, Gunwant, Jones, R. Peter and Mouzakitis, Alexandros. (2009) Model-based testing of a vehicle instrument cluster for design validation using machine vision. Measurement Science & Technology, Vol.20 (No.6). Article no. 065502. ISSN 0957-0233
• Giudice, Sebastiano D., Humphreys, Louise, Jennings, P. A., Cain, Rebecca, Dunne, Garry and Allman-Ward, Mark (2009) Understanding opinion-forming processes during on-road evaluations of whole vehicle sound quality. In: SAE 2009 Noise and Vibration Conference and Exhibition, St. Charles, IL, U.S.A., May 16-18, 2009. Published in: Proceedings of the SAE 2009 Noise and Vibration Conference and Exhibition
• Poeti, L., Marco, James and Vaughan, N. D. (2009) Object oriented plant models for HEV controller development. In: SAE World Congress & Exhibition, Detroit, Michigan, United States, 20 April 2009. Published in: SAE Technical Paper 2009-01-0148
• Marco, James and Vaughan, Nicholas D.. (2009) A classical control approach to the power management of an all-electric hybrid vehicle. International Journal of Vehicle Systems Modelling and Testing, Vol.4 (No.1/2). pp. 55-78. ISSN 1745-6436

 

2008

• Huang, Yingping, McMurran, Ross, Dhadyalla, Gunwant and Jones, R. Peter. (2008) Probability based vehicle fault diagnosis : Bayesian network method. Journal of Intelligent Manufacturing, Vol.19 (No.3). pp. 301-311. ISSN 0956-5515
• Huang, Yingping, Mouzakitis, Alexandros, McMurran, Ross, Dhadyalla, Gunwant and Jones, R. Peter (2008) Design Validation Testing of Vehicle Instrument Cluster Using Machine Vision and Hardware-in-the-loop. In: IEEE International Conference on Vehicular Electronics and Safety, Columbus, OH, Sep 22-24, 2008. Published in: Proceedings of 2008 IEEE International Conference on Vehicular Electronics and Safety, Vol.1 pp. 265-270.
• Best, Matt, Deng, Jiamei, Stobart, Richard and Marco, James (2008) Towards an open source model for engine control systems. In: 2008 SAE International Powertrains, Fuels and Lubricants Congress, Shanghai, China, 23 June 2008. Published in: Society of Automotive Engineers Technical Paper Series
• Harrington, C., Marco, James, Vaughan, N. D. and Kellaway, M. (2008) Affordable add-on, zero emissions plug-in hybrid electric vehicle for commercial urban applications using valve regulated lead-acid battery technology. In: 11th European Lead Battery Conference, Warsaw, Poland, 23–26 Sep 2008. Published in: Proceedings of the 11th European Lead Battery Conference
• Harrington, C. M., Marco, James, Vaughan, N. D., Kellaway, M., Cooper, A. and Eastlake, A. (2008) Affordable hybrid electric system for urban commercial vehicle applications, using advanced VRLA battery. In: IET HEVC 2008 Hybrid and Eco-Friendly Vehicle Conference, 2008, Coventry, 8-9 Dec 2008 pp. 1-8.
• Marco, James (2008) Electrical architectures for hybrid vehicles : implications for modelling and control. In: 2008 International Conference on Control (UKACC), University of Manchester, UK, 2-4 Sep 2008. Published in: Proceedings of the 2008 International Conference on Control (UKACC)

2007

• Marco, James and Vaughan, Nicholas D. (2007) Defining performance metrics for hybrid electric vehicles. In: SAE World Congress & Exhibition, Detroit, Michigan, United States, 16 April 2007. Published in: Society of Automotive Engineers Technical Paper Series
• McCulloch, M., Spowers, H., Vaughan, Nicholas D. and Marco, James. (2007) Modelling the acceleration and braking characteristics of a fuel-cell electric sports vehicle equipped with an ultracapacitor. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.221 (No.1). pp. 67-81. ISSN 0954-4070
• Marco, James and Vaughan, Nicholas D.. (2007) The control-oriented design and simulation of a high voltage bus management strategy for use within hybrid electric vehicles. International Journal of Vehicle Systems Modelling and Testing, Vol.2 (No.4). pp. 345-368. ISSN 1745-6436
• Copper, A., Kellaway, M., Bonnet, B., Marco, James and Vaughan, N. D. (2007) The demonstration of new generation lead-acid batteries in hybrid electric vehicles. In: 2nd European Electric Drive Conference, EET-2007, Brussels, Belgium, 30 May-1 June 2007
• Marco, James (2007) The use of model based design techniques in the design of hybrid electric vehicles. In: 3rd Institution of Engineering and Technology Conference on Automotive Electronics, 2007 , Warwick, UK, 28-29 June 2007. Published in: IEE Conference Publication Series pp. 1-10.

2006

• Cacciatori, E., Vaughan, N. D. and Marco, James (2006) Energy management strategies for a parallel hybrid electric powertrain : fuel economy optimisation with driveability requirements. In: PARD Hybrid Electric Vehicle Conference, Coventry, 12-13 Dec 2006. Published in: IEE Conference Publication Series pp. 157-172.
• Marco, James and Vaughan, N. D. (2006) Improving the commercial viability of fuel cell vehicles through the application of integrated whole vehicle control. In: FISITA 2006 31st World Automotive Congress, Yokohama, Japan, 22-27 October 2006
• Moreno, R., Marco, James, Vaughan, N. D. and Kellaway, M. (2006) In vehicle testing of a 42V lead acid battery management system for hybrid electric vehicles. In: 10th European Lead Acid Battery Conference, Athens, Greece, 26-29 September 2006. Published in: Proceedings of the 10th European Lead Acid Battery Conference

2005

• Marco, James, Vaughan, N. D., Spowers, H. and McCulloch, M. (2005) The importance of whole system design to the viability of fuel cell vehicles. In: 6th International Conference on Materials for Lean Weight Vehicles, University of Warwick, UK, 7-8 December 2005. Published in: Proceedings of the 6th International Conference on Materials for Lean Weight Vehicles

2002

• Marco, James, Ball, R., Jones, R. P. and Roxburgh, A.. (2002) The design and hardware-in-the-loop simulation test of a parallel hybrid transmission control system. International Journal of Vehicle Design, Vol.30 (No.4). pp. 362-385. ISSN 0143-3369

2001

• Marco, James, Ball, R. and Jones, R. P. (2001) The design of a parallel hybrid transmission control system. In: Vaughan, N. D., (ed.) Integrated powertrains and their control. Professional Engineering Publishing: Bury St. Edmunds. ISBN 9781860583346
• Marco, James, Ball, R. and Jones, R. P. (2001) The hardware-in-the-loop simulation test of a parallel hybrid transmission control system. In: 3rd IFAC Workshop on Advances in Automotive Control, University of Karlsruhe, Germany, 28-30 March 2001
• Marco, James and Jones, R. P. (2001) The hardware-in-the-loop simulation testing of automotive control systems. In: International Conference on Advanced Simulation and Control for Automotive Applications. Institute of Mathematics and its Applications, Keble College, University of Oxford, UK, 24-26 September 2001
• Marco, James, Ball, R., Jones, R. P. and Lillie, K.. (2001) A systems modelling and simulation approach to gear shift effort analysis. International Journal of Vehicle Design, Vol.25 (No.4). pp. 317-338. ISSN 0143-3369