Publications
Bristol
- Hopkins, A.; McNeill, N.; Anthony, P.; Mellor, P., "High efficiency bidirectional 5kW DC-DC converter with super-junction MOSFETs for electric vehicle super-capacitor systems," in Energy Conversion Congress and Exposition (ECCE); DOI: 10.1109/ECCE.2015.7310315.
- Hopkins, A.; McNeill, N.; Anthony, P.; Mellor, P., "Figure of merit for selecting super-junction MOSFETs in high efficiency voltage source converters," in Energy Conversion Congress and Exposition (ECCE); DOI: 10.1109/ECCE.2015.7310195.
- Simpson, N.; Mellor, P.H., "Exploiting cloud computing in the multi-physics design and optimisation of electromagnetic devices," in Control and Modeling for Power Electronics (COMPEL), 2015 IEEE 16th Workshop, 12-15 July 2015; DOI: 10.1109/COMPEL.2015.7236508.
- Simpson, N.; Mellor, P.H.; Wrobel, R., "Estimation of equivalent thermal parameters of electrical windings," in Electrical Machines (ICEM), 2012 XXth International Conference, pp.1294-1300, 2-5 Sept. 2012. DOI: 10.1109/ICElMach.2012.6350044.
- Simpson, N.; Wrobel, R.; Mellor, P.H., "Multi-physics design of high-energy-density wound components," in Energy Conversion Congress and Exposition (ECCE), 2015 IEEE, pp.3857-3864, 20-24 Sept. 2015. DOI: 10.1109/ECCE.2015.7310205.
- R. Wrobel, D. Salt, N. Simpson, P. Mellor, "Comparative study of copper and aluminium conductors - future cost effective PM machines", PEMD 2014.
- N. Simpson, R. Wrobel, P. Mellor, "Estimation of Equivalent Thermal Parameters of Impregnated Electrical Windings", IEEE Transactions on Industry Applications, VOL. 49., pp. 2505-2515, 2014.
- R. Wrobel, D. Salt, A. Griffo, N. Simpson, P. Mellor, "Derivation and Scaling of AC Copper Loss in Thermal Modeling of Electrical Machines", IEEE Transactions on Industrial Electronics, VOL. 61., pp. 4412-4420, 2014.
City
- B. Yoheswaran, K. R. Pullen, "Flow and Convective Heat Transfer in Disk-Type Electric Machines with Coolant Flow", International Conference on Electrical Machines (ICEM), Berlin, Germany, 2-5 Sep. 2014.
Cranfield
- W. Fei and P. C. K. Luk, “Investigation of radial electromagnetic force density and vibration in a fractional-slot interior permanent magnet synchronous machine”, Energy Conversion Congress and Exposition (ECCE), 2013 IEEE, pp. 4998 – 5005, 15-19 Sept. 2013, DOI: 10.1109/ECCE.2013.6647375.
- W. Fei, P. C. K. Luk, D. Miao, and J. X. Shen, “Investigation of Torque Characteristics in a Novel Permanent Magnet Flux Switching Machine With an Outer-Rotor Configuration”, Magnetics, IEEE Transactions on (Volume:50 , Issue: 4 ), pp.1-7, April 2014, DOI:10.1109/TMAG.2013.2288219.
- B. Xia, J. X. Shen, P. C. K. Luk, and W. Fei, “Comparative Study of Air-Cored Axial-Flux Permanent-Magnet Machines With Different Stator Winding Configurations”, Industrial Electronics, IEEE Transactions on (Volume:62 , Issue: 2 ), pp.846-856, Feb. 2015, DOI:10.1109/TIE.2014.2353012.
- B. Xia, W. Fei, and P. C. K. Luk, “Analysis and design of V-spoke ferrite interior permanent magnet machine for traction applications”, Power Electronics Systems and Applications (PESA), 2015 6th International Conference on, pp. 1-6, 15-17 Dec. 2015, DOI:10.1109/PESA.2015.7398957.
- W. Liang, W. Fei, and P. C. K. Luk, “An Improved Sideband Current Harmonic Model of Interior PMSM Drive by Considering Magnetic Saturation and Cross-Coupling Effects”, accepted for publication on IEEE Transactions Industrial Electronics (Feb 2016).
- Fei, W., Luk, P.C.K., Liang, W. “Influence of magnet layer number on electromagnetic performance of ferrite interior permanent magnet synchronous machine” International conference on electric machine and systems (ICEMS), October, 2014, pp.1-7. DOI:10.1109/ICEMS.2014.7013435.
- Xia, B., Fei, W., Luk, P.C.K., Wu, D., "Design of a multi-layer interior ferrite permanent magnet synchronous machine for traction applications", 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), 2014, Page(s): 1–6. DOI: 10.1049/cp.2014.0444.
- Xia, B., Luk, P.C.K., Fei, W., Yu, L., "Particle swarm optimization of air-cored axial flux permanent magnet generator for small-scale wind power systems", 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), 2014, Page(s): 1–6.
- Wu, D., Fei, W., Luk, P.C.K., Xia, B., "Design considerations of outer-rotor permanent magnet synchronous machines for in-wheel electric drivetrain using particle swarm optimization", 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), 2014, Page(s): 1–6. DOI: 10.1049/cp.2014.0449.
- Fei, W., Luk, P.C.K., Xia, B., Wu, D., "Design improvement of outer-rotor permanent magnet flux switching machine for direct-drive urban electric vehicle propulsion", Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE, 2013, Page(s): 7319-7324. DOI: 10.1109/IECON.2013.6700350.
- Fei, W., Luk, P.C.K., Wu, D., Xia, B, "Approximate three-dimensional finite element analysis of large permanent magnet sychronous generators with stator radial ventilating ducts", Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE, 2013 , Page(s): 7313-7318; DOI:10.1109/IECON.2013.6700349.
- Wu, D., Fei, W., Luk, P.C.K, "Design optimizations of outer-rotor permanent magnet synchronous machines with fractional-slot and concentrated-winding configurations in lightweight electric vehicles", Power Electronics Systems and Applications (PESA); 2015, Pages: 1 - 8, DOI: 10.1109/PESA.2015.7398956.
Liverpool John Moores
- I.Subotic, N.Bodo, E.Levi; Single-phase on-board integrated battery chargers for EVs based on multiphase machines, IEEE Trans. on Power Electronics. 1. DOI 10.1109/TPEL.2015.2504400.
- I.Subotic, N.Bodo, E.Levi, B.Dumnic, D.Milicevic, V.Katic; Overview of fast on-board integrated battery chargers for electric vehicles based on multiphase machines and power electronics, IET – Electric Power Applications. 2. DOI 10.1049/iet-epa.2015.0292.
- I. Subotic, N. Bodo, E. Levi, B. Dumnic, D. Milicevic, V. Katic; An integrated multiphase system for slow and fast EV battery charging, 18th Int. Symp. on Power Electronics - Ee 2015, Novi Sad, Serbia, 28-20 October 2015, Paper no. T2-3, pp. 1-5, ISBN: 978-86-7892-757-7.
- I.Subotic, N.Bodo, E.Levi, "An EV drive-train with integrated fast charging capability", IEEE Trans. on Power Electronics, DOI 10.1109/TPEL.2015.2424592. Open access, available at http://ieeexplore.ieee.org.
- I.Subotic, N.Bodo, E.Levi, M.Jones, V.Levi, "Isolated chargers for EVs incorporating six-phase machines", IEEE Trans. on Industrial Electronics. DOI: 10.1109/TIE.2015.2412516. Open access, available at http://ieeexplore.ieee.org.
- N.Bodo, I.Subotic, E.Levi, M.Jones, "Single-phase on-board integrated battery charger based on a nine-phase machine", IEEE Ind. Elec. Soc. Annual Meeting IECON, Dallas, TX, 2014, pp. 3210-3216.
- I.Subotic, E.Levi, N.Bodo, "A fast on-board integrated battery charger for EVs using an asymmetrical six-phase machine", Vehicle Power and Propulsion Conference, Coimbra, Portugal, 2014. DOI: 10.1109/VPPC.2014.7006996
- I.Subotic, M.Jones, E.Levi, "A fast on-board integrated battery charger for four-motor EVs", Int. Conf. on Electrical Machines (ICEM), Berlin, Germany, 2-5 Sep. 2014, pp. 2060-2066.
- I.Subotic, N.Bodo, E.Levi, M.Jones, "On-board integrated battery charger for EVs using an asymmetrical nine-phase machine", IEEE Trans. on Industrial Electronics, vol. 62, no.5, 2015, pp.3285-3295.
- I. Subotic, E.Levi, "An Integrated Battery Charger for EVs Based on a Symmetrical Six-Phase Machine", IEEE Int. Symp. on Industrial Electronics ISIE, Istanbul, Turkey, 01-04 June 2014. DOI: 10.1109/ISIE.2014.6864937.
- I. Subotic, E. Levi, M. Jones and D. Graovac, "Multiphase integrated onboard battery chargers for electrical vehicles", EPE'113 ECCE Europe - 15th European Conference on Power Electronics and Applications, Lille, France, Sept 2013.
- I. Subotic, E. Levi, M. Jones and D. Graovac, "On-board integrated battery chargers for electric vehicles using nine-phase machines", IEEE International Electric Machines and Drive Conference, IEMDC, Chicago, IL., May 2013.
- I.Subotic, E. Levi, M. Jones, "An integrated battery charger for EVs based on an asymmetrical six-phase machine", IEEE Industrial Electronics Society, Vienna, Austria, Nov 2013.
- I.Subotic, E.Levi, "A review of single-phase on-board integrated battery charging topologies for electric vehicles", IEEE Workshop on Electrical Machines Design, Control and Diagnosis WEMDCD, Turin, Italy, 2015, pp. 136-145.
Manchester
- G. Calderon-Lopez, A. Villarruel-Parra, P. Kakosimos, S. K. Ki, R. Todd and A. J. Forsyth, "A Comparison of Digital PWM Control Strategies for High Power Interleaved DC-DC Converters", PEMD 2016, Glasgow (to be published 2016).
Newcastle
- Ji, B.; Song, X.G.; Cao, W.P.; Pickert, V., "Active temperature control of Li-ion batteries in electric vehicles", Hybrid and Electric Vehicles Conference 2013 (HEVC 2013), IET Conference Publication, Pages: 1 - 5, 2013. DOI: 10.1049/cp.2013.1916.
- M. Besharati, J. Widmer, G. Atkinson, V. Pickert, "Super-High-Speed Switched Reluctance Motor for Automotive Traction", ECCE-Conference Montreal,
20-24/9/2015.
-
X. Song, J. Zhang, S. Kang, M. Ma, B. Ji, W. Cao, V. Pickert, "Surrogate-Based Analysis and Optimization for the Design of Heat Sinks With Jet Impingement", IEEE Transactions on Components, Packaging and Manufacturing Technology, VOL. 4, NO. 3, MARCH 2014.
- H. Wu, V. Pickert, "Stability analysis and control of nonlinear phenomena in bidirectional boost converter based on Monodromy matrix", Applied Power Electronics Conference and Exposition (APEC) 2014, IEEE, Fort Worth, USA, Page(s): 2822-2827, 2014.
- H. Wu, V. Pickert, "Nonlinear analysis and control for an interleaved boost converter based on the Monodromy matrix" Energy Conversion Congress and Exposition (ECCE) 2014, IEEE, Pittsburgh, USA.
-
M. Besharati, K. R. Pullen, J. D. Widmer, G. Atkinson and V. Pickert, "Investigation of the Mechanical Constraints on the Design of a Super-high-speed Switched Reluctance Motor for Automotive Traction", Power Electronics, Machines and Drives (PEMD 2014), 7th IET International Conference, 8-10 April 2014. DOI:10.1049/cp.2014.0457.
Nottingham
- Saeed, R.; Johnson, C.M.; Empringham, L.; de Lillo, L., "High current density air cored Inductors for direct power module integration," Power Electronics and Applications (EPE'14-ECCE Europe), 2014 16th European Conference on , vol., no., pp.1,6, 26-28 Aug. 2014. DOI: 10.1109/EPE.2014.6911046.
Sheffield
- D.A. Hewitt, D.A. Stone, M.P. Foster, "Modelling the enhancement to the thermal performance of encapsulants using thermally conductive filler materials"; PCIM Asia 2015.
- D.A. Hewitt, D.A. Stone, M.P. Foster, "An experimental evaluation of thermally conductive filler loaded encapsulant composites", PEMD 2014; paper 313.
- D.A. Hewitt, D.A. Stone, M.P. Foster, “Design of thermally integrated planar inductors utilising aluminium oxide as a winding insulation material", PCIM Europe 2013; 14-16/5/13, Nuremberg; pp 223-230.
- D.A. Hewitt, D.A. Stone, M.P. Foster; "An investigation into the feasibility of using aluminium oxide to insulate aluminium planar windings"; iPower2; 28-29/11/12, University of Warwick; Poster 6.
Southampton
- Donoghue, J.C., Cruden, A.J., “Whole System Modelling of V2G Power Network Control, Communications and Management“, Electronic Vehicle Symposium 27 (Barcelona, 2013). DOI: 10.1109/EVS.2013.6914880.
Warwick
- F. Li, Y. Sharma, V. Shah, M. Jennings, A. Pérez-Tomás, M. Myronov, et al., "Electrical activation of nitrogen heavily implanted 3C-SiC(1 0 0)," Applied Surface Science, vol. 353, pp. 958-963, 10/30/ 2015.
- Y. K. Sharma, F. Li, M. R. Jennings, C. A. Fisher, A. Pérez-Tomás, S. Thomas, et al., "High-Temperature (1200–1400°C) Dry Oxidation of 3C-SiC on Silicon," Journal of Electronic Materials, pp. 1-8, 08/07/ 2015.
- F. Li, Y. Sharma, C. Fisher, M. Jennings, and P. Mawby, "A novel 3C-SiC on Si power Schottky diode design and modelling," in MRS Spring Meeting & Exhibit, San Francisco, 2014.
- F. Li, Y. Sharma, C. Fisher, H. Rong, M. Jennings, and P. Mawby, "Study of a novel lateral RESURF 3C-SiC on Si Schottky diode," in EPE'14 ECCE Europe, Lappeenranta, 2014.
- F. Li, Y. Sharma, D. Hamilton, C. Fisher, M. Jennings, S. Burrows, and P. Mawby ''Activation of nitrogen implanted 3C-SiC with deposited SiO2'' in European Silicon Carbide and Related Materials 2014. (Accepted)
- Y.K. Sharma, F. Li, M.R. Jennings, C.A. Fisher, D. Hamilton, S.M. Thomas, A. Pérez-Tomás, P.A. Mawby, “Fabrication of 3C-SiC MOS capacitors using high-temperature oxidation'' in European Silicon Carbide and Related Materials 2014 (Accepted).
- Sharma, Y. K., F. Li, C. A. Fisher, M. R. Jennings, A. Perez-Tomas, S. M. Thomas, D. Hamilton, and P. A. Mawby. "Electrical Properties of the 3C-SiC/SiO2 Interface Grown With High Temperature Oxidation." (2014).
- Y.K. Sharma, F. Li, M.R. Jennings, C.A. Fisher, A. Pérez-Tomás, S. Thomas, D.P. Hamilton, S. A. O. Russell, and P.A. Mawby, "High-temperature dry oxidation (1200-1400oC) and N2O passivation of the 3C-SiC/SiO2 interface" (in preparation).