Skip to main content Skip to navigation

Lecture Capture

To record lectures we use the Echo360 system supplied by the University AV Services. They provide lots of useful information on this service, please see the link below:

  • If you are teaching in a room outside of WBS please contact AV Services via the link above
  • If you will be teaching in a room inside of WBS please see the information below.

There are two methods available for capturing lectures in WBS rooms:

Option 1) Lecture Capture 

This uses a dedicated hardware box in the room that is scheduled to record lectures. By default it will capture anything projected onto the centre screen although it is possible for it to be configured to capture more than one input (e.g. PowerPoint on the centre screen and the Visualiser output from the side screens). Although possible we will not capture video of the lecturer unless specifically requested. Using this system the capture is scheduled so there is one less thing for you to worry about. The downside is that if the lecture capture is scheduled for 4pm to 6pm it will end exactly at that time, even if your actual lecture overruns slightly.

This service is available in the following WBs rooms:

0.004 - WBS Scarman Road 0.006 - WBS Scarman Road 0.013 - WBS Scarman Road 0.301- Executive Teaching Centre
1.009 - WBS Scarman Road 1.301 - Executive Teaching Centre 2.004 - WBS Scarman Road 3.006 - WBS Scarman Road
M1 - WBS Teaching Centre M2 - WBS Teaching Centre East theatre - Shard South theatre - Shard


Option 2) Personal Capture 

This uses software installed on the lectern computer to capture the audio and pictures from what is happening on the computer. It cannot capture images on the visualiser or similar. You can use this service without needing to make a reservation but you still need publishing space on Echo360/Moodle in the same way for lecture capture, plus you will need to remember to start and end the recording as well as spend a couple of minutes at the end uploading the content to the Echo360 server.

We only support Personal Capture in rooms without a dedicated hardware box.

Important: Both systems require you to wear and un-mute a radio microphone to record the audio

Sounds good, how can I get my lecture captured?

Changes to the Lecture Recording Process 2017-18

There have been some changes to the lecture recording process for 2017-18. This guidance explains how lecture recordings will be shared with students (including how to manage and edit recordings). The first two steps in the process are unchanged:

Step 1 - Consent

You must complete the lecturer consent form. This need only be completed once per person but no recordings can be shared without a completed form.

Step 2 - Request lecture recording

If you wish to organise lecture capture for your module, please send an email to:

Undergraduate Programmes: 

Postgraduate Programmes:

You will need to provide information about the dates, times and rooms for each lecture, as well as details of the presenters (if there is more than one person teaching on the module).

Requests for recordings should be made at least 72 hours in advance of the lecture. We cannot guarantee that any requests made later than this will be processed in time.

Step 3 – Sharing recordings with students

You will not receive an email telling you that your recording has been completed.

Recordings will be accessible immediately via your my.wbs module, but will not be available to students until you release them.

Releasing recordings

NB: You can choose when to make recordings available to students. By default, when you make recordings available by the method show below, ALL recordings on the module will be visible to students as they are completed. You can, however, ‘hide’ individual recordings – see the guidance under ‘Editing Recordings’, below.

At the bottom of the module page, you will see a series of tabs. One of these is ‘lecture recordings’




By default these will not be enabled, so students will not be able to see them. Click on ‘yes’ to enable students to view lectures.

You can check which recordings are complete by clicking on ‘view available recordings’

This is the student view of the lecture recording tab:

Step 4 – Managing your recordings

To access available recordings for your module, click on the link (3 in the image above). You will be able to access recordings for your module even when this has not been enabled for students.

This will take you to a Moodle space where the videos are housed. You will be prompted to sign in to Moodle (you can use either your WBS or your IT Services credentials).

First click on the lecture capture block:

This will take you to a list of your recordings.

The green button to the right of the video title allows you to:

Make individual recordings unavailable (1)

You may wish to do this if you wish to delay the release of some recordings but not others, or if you wish to edit a video before students watch it. Just click on the link at (1), in the diagram below. The green button will turn grey. When you wish to make the video available again, click on ‘Make video available’ (in the same drop down menu), and the button will turn green again.



Edit Recordings (2)

First, you can make the video unavailable while you make any edits (see above) if you wish.

Click on the link at (2) in the diagram above. This will take you to the video editing screen. When you have made your edits, click ‘Save’ to return to the main video dashboard and make the finished video available to students.