Skip to main content Skip to navigation

Videos

What CIU members say

Dave Watkins, CEO of Zinco International Ltd explains how he worked with the CIU to develop an ultrasonic NDT system that measures the thickness of the steel wall of a galvanising kettle under molten zinc at 450 C.

Colin Edge of Dynoptic Systems Ltd describes how they have worked with the CIU on postdoctoral researcher and student projects.

David Crosthwaite-Eyre of Cygnus Ltd describes how they have worked with the CIU on various short term research projects.


IF YOU WOULD LIKE TO CHECK FOR JOURNAL REFERENCES TO SOME OF THE WORK IN THE VIDEOS BELOW, IT IS WORTH LOOKING ON WARWICK WRAP OR THE MORE COMPREHENSIVE LIST OF PUBLICATIONS IN THE LINKS ON THE MAIN PAGE AT THE TOP OF THIS SCREEN.

WARWICK WRAP LINKS:

Steve Dixon Dave Hutchins Rachel Edwards Duncan Billson

CIU conference talks 2022

REMOCC IUK Project to measure stress in fibre reinforced concrete (November 2022)

Resonant Inspection of Nuclear Material Storage Containers (Elizabeth Sharp, Sept 2022)

Transit Time Difference Clamp-on Flowmeter Using Ultrasonic Guided Waves (Steve Dixon, October 2022)

High Accuracy. Low Cost Ultrasonic Anemometers (Steve Dixon, October 2022)

Active Damping of Narrowband Transducers [using flexural ultrasonic transdcuers] (Will Somerset, Sept 2022)

Liquid Crystal Sensors for Ultrasonic Displacement Measurements (Martha Turvey, Sept 2022)

Magnetostrictive Patches for NDT and SHM (Oksana Trushkevych, Sept 2022)

Clamp-on Transit Time Difference Flowmeter (Luke Smith, Sept 2022)


CIU meeting September 2021 - short update session

Thermosonics (update)

Rail track surface and foot ultrasonic testing with EMATs

Guided wave flow for thin walled, small diameter metal pipes


CIU meeting December 2020

Themosonics

Active damping of ultrasonic transducers by engineering the pressure wave

Detecting weld defects in thin titanium plates using SH wave EMATs

CFC and glass fibre composite NDE using EMAT generated guided waves and capacitive imaging

Miniture EMATs for fast robotic NDT screening of metal components

Development of high temperature, high frequency flexural ultrasonic transducers

Non-contact acoustic resonance measurements for pressure measurement of sealed storage containers

Phased array EMAT for surface defect detection using Rayleigh waves

Flexural ultrasonic transducer measurements at high pressure


General Technical

Overview of some of the technical achievements of CIU (from 2011 launch meeting)Link opens in a new window

CIU water flow rig CAD model (CIU)Link opens in a new window

EMAT Basics - a video aimed at giving an overview to the non-specialist


Other / Miscellaneous

Oureach video aimed at secondary school level - March 2021

Tony Lord R&D Tax Credits Overview Link opens in a new window

Linked in with our research on flexural transducers we took part in a TV programme to explain how Chladni plates work (courtesy of and copyright of Magnum Media Limited)