Skip to main content Skip to navigation

Slow Sand Filtration Within Rainwater Tanks

Celia Way and Terry Thomas

12th International Rainwater Catchment Systems Conference, New Delhi, India, 2005

Slow sand filtration is a long-established technique for improving the biological and physical quality of water. In its standard form water is passed at about 200mm/hour down through a bed of sand about 1 metre deep. For use inside a household rainwater tank however we require a much cheaper and therefore shallower filter and we must accommodate the intermittent flow corresponding to water being drawn off for a few minutes several times a day. A tenth-scale model of such a filter was built in the laboratory and used to show that very shallow sand filters (as little as 5cm deep) are effective even when they are operated very intermittently – reductions in faecal coliform count of about 95% were obtained. Some field tests in Uganda then followed which confirmed the effectiveness of the technique. The paper describes the findings and also examines how slow-sand filtration could actually be incorporated in rainwater tank design. filters reported here.


Full paper available from the conference site

Full paper as a final draft submitted for publication (PDF Document)