Skip to main content

Yu Zeng

Yu Zeng is a member of the Communications and Signal Processing Research Group in the Electrical and Electronic Division of the School of Engineering at the University of Warwick. Member of IEEE(S'05-07), IEE (S'06-07) His research interest is in optical wireless, pulse-modulation, adaptive modulations, channel simulations.


Publications:


Conference:

1. Zeng, Y. Green, R.J. Leeson, M. S "Adaptive Pulse Amplitude and Position Modulation for Optical Wireless Channels" at the The 2nd IEE International Conference on Access Technologies 21st to 22nd June 2006, Abington Hall, Cambridge, UK

This paper appears in: Access Technologies, 2006. The 2nd Institution of Engineering and Technology International Conference on
Publication Date: 21-22 June 2006
On page(s): 13 - 16
ISSN: 0537-9989

2. Zeng, Y. Green, R.J."Modulation Adaptive System for Wireless Infrared Channels" at the fifth annual PostGraduate symposium on the convergence of Telecommunications, Networking and Broadcasting (PGNET 2004) 28 & 29 June 2004, University of Liverpool, Liverpool, UK

This paper appears in: The 5th Annual Postgraduate Symposium on the Convergence of Telecommunications, Networking and Broadcasting
Publication Date: 28-29 June 2004
On page(s): 74 - 77
ISBN: 1-9025-6010-8

Journals:

1. Rashvand, H.F. Zeng, Y. Green, R.J. and Leeson, M.S. "Lookup Table Error Correcting Multiple Pulse PPM Codes for Wireless Optical Communication Channels" IET Communications Special Issue on Optical Wireless Communication Systems, 2008

This paper appears in: Communications, IET
Publication Date: January 2008
Volume: 2, Issue: 1
On page(s): 27-34
ISSN: 1751-8636

2.Zeng, Y. Green, R.J. Sun, S.B. and Leeson, M.S. "Tunable Pulse Amplitude and Position Modulation Technique for Reliable Optical Wireless Communication Channels" Journal of Communications, Academy Publisher, Vol. 2, No. 2, March 2007


Teaching & Lab Demo:

ES174 - Introduction to Electronics Workbench (F211)

ES180 - Introductory Laboratory- Electronic Measurement (A206)

ES2A4 - Electronic Design

Transistor Laboratory
Optoelectronic Devices Laboratory
Optical Preamplifier

ES156 - Professional Studies

ES156 - Self evaluation in the context of the ¡¡ãElectronic PCB Circuit Design, Simulation, Manufacture and Evaluation Project¡¡À

ES156 - Professional Studies I: PCB evaluation ¡§C A Problem Based Learning Approach

ES156 - Professional Studies I Electronic PCB Circuit Design, Simulation, Manufacture and Evaluation Project

ES156¡§CProfessional Studies I Electronic PCB Circuit Design, Simulation, Manufacture and Evaluation Project Session 1: ¡®PCB design 1 - Basics¡¯ and initial Self-Evaluation in terms of PCB design and manufacture

ES156¡§CProfessional Studies Electronic PCB Circuit Design, Simulation, Manufacture and Evaluation Project Session 2: ¡®PCB design 2 - Intermediate¡¯ The main objective for this session is to confirm your understanding of some of the ¡®PCB design 1 - Intermediate¡¯ related concepts, ideas etc. To do this we will be making use of a ¡®virtual laboratory¡¯ and an associated quiz. You are expected to complete the quiz sheet before you leave the laboratory!

ES156¡§CProfessional Studies I Electronic PCB Circuit Design, Simulation, Manufacture and Evaluation Project Session 3: ¡®PCB design 3 ¡§C More advanced aspects and logic probe circuit¡¯The main objective for this session is to confirm your understanding of some of the ¡®PCB design 3 ¡§C More advanced and logic probe circuit¡¯ related concepts, ideas etc. To do this we will be making use of a ¡®virtual laboratory¡¯ and an associated quiz. You are expected to complete the quiz sheet before you leave the laboratory!

ES156¡§CProfessional Studies I Electronic PCB Circuit Design, Simulation, Manufacture and Evaluation Project Session 4: Constructing and basic testing of your circuit The main objective for this session is to confirm your understanding of some of the ¡®PCB design 4 ¡§C Constructing your circuit¡¯ related concepts, ideas etc. To do this we will be making use of a ¡®virtual laboratory¡¯ and an associated quiz. You are expected to complete the quiz sheet before you leave the laboratory, where possible!

ES156¡§CProfessional Studies I Electronic PCB Circuit Design, Simulation, Manufacture and Evaluation Project Session 5: Evaluating/verifying correct functionality of your circuit and final Self-Evaluation in terms of PCB design, simulation, manufacture and evaluation, etc The main objective for this session is to confirm your understanding of some of the ¡®PCB design 5 ¡§C Evaluating/verifying correct functionality of your circuit in the context of appropriate theory (from appropriate lectures etc), circuit simulation, testing in the laboratory etc ¡¯ related concepts, ideas etc. To do this we will be making use of a ¡®virtual laboratory¡¯ and an associated quiz. You are expected to complete the quiz sheet before you leave the laboratory, where possible!

Contact Me

Yu Zeng
E&E Division
School of Engineering
University of Warwick
Coventry
CV4 7AL
United Kindom

Tel:
44 (0)24 7615 0422

Email:
yu.zeng@warwick.ac.uk