As part of our continued drive to modernise and improve the service we will be carrying out an upgrade to 230 (109x A3 and 121x A4) devices within the Managed Print Service (MPS) fleet across campus from the 18th December onwards.

During this process we will also be removing and retiring existing MFDs based upon two key factors:

• The ongoing financial cost to provide the service
• The reduced volumes being produced with customer's and colleagues WFH and operating in a far more digital focused environment

This is in direct response to changing patterns of usage within the print environment at Warwick and the wider print industry.

We apologise for any inconvenience this may cause.

We will of course closely monitor print volumes and device reliability patterns and can look to reinstate devices as and when deemed absolutely necessary.

This does remain a judgement call for the Managed Print Service (MPS).

The service is provided free at the point of use and has no recharge activities taking place on a quarterly basis for all departments apart from the WSU.

We welcome the opportunity to discuss this policy with all of our colleagues and customers on a case by case basis as needed.

The benefits to our staff and student customers of the newer devices of these planned works will include:

• More modern and reliable - fewer jams
• Faster print times - less waiting for your jobs
• Higher quality/resolution print output - better quality printed documents
• Enhanced transparency sheet print capabilities - deeper black production and better defined text output
• Higher toner yields - fewer cartridge orders, less plastic waste, fewer toner deliveries
• Reduced diversity of toner cartridges - less complexity, less confusion and a much simpler supply and support model
• Reduced plastic waste - using the empty black cartridge as a fresh waste box and lower energy consumption
• Larger, more sensitive and responsive touchscreens - easier to use and more accessible
• The use of encrypted hard disks and walk up, wake up presence sensors - more secure and faster to use
• Smaller physical footprint - saving valuable office space
• The retirement of slower, older, energy hungry legacy MFDs - improved operational efficiency
• The retirement of legacy Push Print queues associated with HP and Kyocera Managed Print Devices - helping to ensure GDPR compliance
• The removal of lower volume or unused legacy devices - improved operational efficiency and reduced energy consumption
• The retirement of legacy analogue technologies such as fax will also take place - reduced line rental and device costs
• Enhanced remote management and device status/health monitoring - improved support and fault resolution

Customers will typically find that the process to remove and replace their MFD will take around 15 minutes from arrival to the new device being ready for use.

The existing Pull Print queues, drivers and embedded applications will remain operational and only minor differences to the user interface on the new devices will be seen.

The project is expected to start from the 18th December 2023 and run for an initial 3 month period.

Communication to local departments will be handled on a case by case basis as and when it is deemed absolutely necessary.

We expect disruption to our customers to be kept to an absolute minimum.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

As part of our continued drive to modernise and improve the service we will be carrying out an upgrade to 214 (184x A3 and 30x A4) devices within the Managed Print Service (MPS) fleet across campus from the 1st December onwards.

During this process we will also be removing and retiring existing MFDs based upon two key factors:

• The ongoing financial cost to provide the service
• The unprecedented low volumes being produced with customer's and colleagues WFH and operating in a far more digital focused environment

This is in direct response to the Covid pandemic and the changing patterns of usage within the print environment at Warwick and the wider print industry.

We apologise for any inconvenience this may cause.

We will of course closely monitor print volumes and device reliability patterns and can look to reinstate devices as and when deemed absolutely necessary.

This does remain a judgement call for the Managed Print Service (MPS).

The service is provided free at the point of use and has no recharge activities taking place on a quarterly basis for all departments apart from the WSU.

We welcome the opportunity to discuss this policy with all of our colleagues and customers on a case by case basis as needed.

The benefits to our staff and student customers of the newer devices of these planned works will include:

• More modern and reliable - fewer jams
• Faster print times - less waiting for your jobs
• Higher quality/resolution print output - better quality printed documents
• Enhanced transparency sheet print capabilities - deeper black production and better defined text output
• Higher toner yields - fewer cartridge orders, less plastic waste, fewer toner deliveries
• Reduced diversity of toner cartridges - less complexity, less confusion and a much simpler supply and support model
• Reduced plastic waste - using the empty black cartridge as a fresh waste box and lower energy consumption
• Larger, more sensitive and responsive touchscreens - easier to use and more accessible
• The use of encrypted hard disks and walk up, wake up presence sensors - more secure and faster to use
• Smaller physical footprint - saving valuable office space
• The retirement of slower, older, energy hungry legacy MFDs - improved operational efficiency
• The retirement of legacy Push Print queues associated with HP and Kyocera Managed Print Devices - helping to ensure GDPR compliance
• The removal of lower volume or unused legacy devices - improved operational efficiency and reduced energy consumption
• The retirement of legacy analogue technologies such as fax will also take place - reduced line rental and device costs
• Enhanced remote management and device status/health monitoring - improved support and fault resolution

Customers will typically find that the process to remove and replace their MFD will take around 15 minutes from arrival to the new device being ready for use.

The existing Pull Print queues, drivers and embedded applications will remain operational and only minor differences to the user interface on the new devices will be seen.

The project is expected to start from the 1st December 2021 and run for an initial 3 month period.

Communication to local departments will be handled on a case by case basis as and when it is deemed absolutely necessary.

We expect disruption to our customers to be kept to an absolute minimum.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

The Managed Print Service is very pleased to announce that we have now saved over 2 million sheets of paper since the inception of the Pull Print service in 2012.

Visit our save o meter for more details....

The Managed Print Service is delighted to announce that it has received the "Simplify Team Award" at the 2015 CCSG Awards Evening on the 8th May. Our sincere thanks to every member of the team now and over the last 5 years and to all of our colleagues within ITS, warwickprint and Purchasing for their tireless hard work and support.

We would also like to thank all of our staff, student, alumni and visitor customers and look forward to continuing to develop and improve the service that we offer to each and every one of you.

A live real-time copy of the SafeCom Save-O-Meter is now available! (N.B. You must be on a campus network to view this page)

This provides a graphical representation of the work that we have carried out to-date, giving you an overview of the progress that is being made to improve both the overall efficiency and financial/environmental credentials of print within the MPS.

A more detailed breakdown of all of the Service Metrics /SLT's for the Printing Services team is also available.

Click on the image below for the real-time information.

This tool can be used to provide a direct like for like comparision with our colleagues in the HE sector.

For example the following institutions also utilise the SafeCom Print Management solution.

• Cranfield
• Aberdeen
• Brunel
• Imperial College London
• Manchester
• UCL
• MMU
• Leeds Beckett
• Leeds Metropolitian University
• Newcastle University
• University of Lincoln
• York
• St Andrews

Staff members can now order stationery and posters via an electonic shopping system, Digital Storefront (DSF)

Please note: Payments are currently via University cost code only.

Please watch the video or read the leaflet to find out more about the new online service.