As part of our continued drive to modernise and improve the service we will be carrying out an upgrade to 230 (109x A3 and 121x A4) devices within the Managed Print Service (MPS) fleet across campus from the 18th December onwards.

During this process we will also be removing and retiring existing MFDs based upon two key factors:

• The ongoing financial cost to provide the service
• The reduced volumes being produced with customer's and colleagues WFH and operating in a far more digital focused environment

This is in direct response to changing patterns of usage within the print environment at Warwick and the wider print industry.

We apologise for any inconvenience this may cause.

We will of course closely monitor print volumes and device reliability patterns and can look to reinstate devices as and when deemed absolutely necessary.

This does remain a judgement call for the Managed Print Service (MPS).

The service is provided free at the point of use and has no recharge activities taking place on a quarterly basis for all departments apart from the WSU.

We welcome the opportunity to discuss this policy with all of our colleagues and customers on a case by case basis as needed.

The benefits to our staff and student customers of the newer devices of these planned works will include:

• More modern and reliable - fewer jams
• Faster print times - less waiting for your jobs
• Higher quality/resolution print output - better quality printed documents
• Enhanced transparency sheet print capabilities - deeper black production and better defined text output
• Higher toner yields - fewer cartridge orders, less plastic waste, fewer toner deliveries
• Reduced diversity of toner cartridges - less complexity, less confusion and a much simpler supply and support model
• Reduced plastic waste - using the empty black cartridge as a fresh waste box and lower energy consumption
• Larger, more sensitive and responsive touchscreens - easier to use and more accessible
• The use of encrypted hard disks and walk up, wake up presence sensors - more secure and faster to use
• Smaller physical footprint - saving valuable office space
• The retirement of slower, older, energy hungry legacy MFDs - improved operational efficiency
• The retirement of legacy Push Print queues associated with HP and Kyocera Managed Print Devices - helping to ensure GDPR compliance
• The removal of lower volume or unused legacy devices - improved operational efficiency and reduced energy consumption
• The retirement of legacy analogue technologies such as fax will also take place - reduced line rental and device costs
• Enhanced remote management and device status/health monitoring - improved support and fault resolution

Customers will typically find that the process to remove and replace their MFD will take around 15 minutes from arrival to the new device being ready for use.

The existing Pull Print queues, drivers and embedded applications will remain operational and only minor differences to the user interface on the new devices will be seen.

The project is expected to start from the 18th December 2023 and run for an initial 3 month period.

Communication to local departments will be handled on a case by case basis as and when it is deemed absolutely necessary.

We expect disruption to our customers to be kept to an absolute minimum.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

On Saturday 2^nd September, between 08:00-14:00, there will be no access to printing and photocopying services provided by IT, while we carry out a major server upgrade.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

What will be affected and unavailable during this downtime?

• Staff & Student pull and push printing, including that within the Linux Managed desktop
• MobilePrint
• AirPrint
• Mail2Me (Scan to Email)
• Copy (including Library Visitor Cards)
• printing.warwick.ac.uk webpage
• SafeCom Saveometer
• Autostore (Scan to Folder) 
• The processing of Printer Credits will also be offline.

Please note that the IT provided CUPS will be unaffected by these planned works and will remain available for the duration of this change.

As part of our continued drive to modernise and improve the service we will be carrying out an upgrade to 214 (184x A3 and 30x A4) devices within the Managed Print Service (MPS) fleet across campus from the 1st December onwards.

During this process we will also be removing and retiring existing MFDs based upon two key factors:

• The ongoing financial cost to provide the service
• The unprecedented low volumes being produced with customer's and colleagues WFH and operating in a far more digital focused environment

This is in direct response to the Covid pandemic and the changing patterns of usage within the print environment at Warwick and the wider print industry.

We apologise for any inconvenience this may cause.

We will of course closely monitor print volumes and device reliability patterns and can look to reinstate devices as and when deemed absolutely necessary.

This does remain a judgement call for the Managed Print Service (MPS).

The service is provided free at the point of use and has no recharge activities taking place on a quarterly basis for all departments apart from the WSU.

We welcome the opportunity to discuss this policy with all of our colleagues and customers on a case by case basis as needed.

The benefits to our staff and student customers of the newer devices of these planned works will include:

• More modern and reliable - fewer jams
• Faster print times - less waiting for your jobs
• Higher quality/resolution print output - better quality printed documents
• Enhanced transparency sheet print capabilities - deeper black production and better defined text output
• Higher toner yields - fewer cartridge orders, less plastic waste, fewer toner deliveries
• Reduced diversity of toner cartridges - less complexity, less confusion and a much simpler supply and support model
• Reduced plastic waste - using the empty black cartridge as a fresh waste box and lower energy consumption
• Larger, more sensitive and responsive touchscreens - easier to use and more accessible
• The use of encrypted hard disks and walk up, wake up presence sensors - more secure and faster to use
• Smaller physical footprint - saving valuable office space
• The retirement of slower, older, energy hungry legacy MFDs - improved operational efficiency
• The retirement of legacy Push Print queues associated with HP and Kyocera Managed Print Devices - helping to ensure GDPR compliance
• The removal of lower volume or unused legacy devices - improved operational efficiency and reduced energy consumption
• The retirement of legacy analogue technologies such as fax will also take place - reduced line rental and device costs
• Enhanced remote management and device status/health monitoring - improved support and fault resolution

Customers will typically find that the process to remove and replace their MFD will take around 15 minutes from arrival to the new device being ready for use.

The existing Pull Print queues, drivers and embedded applications will remain operational and only minor differences to the user interface on the new devices will be seen.

The project is expected to start from the 1st December 2021 and run for an initial 3 month period.

Communication to local departments will be handled on a case by case basis as and when it is deemed absolutely necessary.

We expect disruption to our customers to be kept to an absolute minimum.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

On Saturday 18th December, between 08:30-14:30, there will be no access to printing and photocopying services provided by IT, while we carry out a major server upgrade.

On Saturday 10th July, between 08:30-14:30, there will be no access to printing and photocopying services provided by IT Services, while we carry out a major server upgrade.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

On Tuesday 6th July, between 08:00 - 10:00, we will be carrying out a server upgrade on the LightTouch Digital Filing (Scan to folder) service, as such the service should be considered at risk / offline for the period of upgrade.

For advice or support, please contact us: https://www.warwick.ac.uk/helpdesk

What will be affected and unavailable during this downtime?

• The Scan to folder option from compatible Kyocera MFDs

On Saturday 27th March from 9AM onwards there will be no access to printing and photocopying services provided by IT Services as major server upgrade work is carried out during the day. We hope this work will be finished before 4pm but may continue until then.

Printing Services have relocated and deployed two additional Kyocera Student Printing MFDs into Junction Hall 1 and Reception.

This is to allow for improved study and learning capabilities on campus in light of the continued Covid 19 situation and associated building lockdowns.

Any customers with concerns or questions should contact the ITS Helpdesk via the usual support channels.

Junction Hall 1

Junction Reception

Printing Services have relocated and deployed two additional Kyocera Student Printing MFDs into the Rootes Flexigrid and the Chancellors Suite within the Rootes Building.

This is to allow for improved study and learning capabilities on campus in light of the continued Covid 19 situation and associated building lockdowns.

Any customers with concerns or questions should contact the ITS Helpdesk via the usual support channels.

Rootes Flexigrid

Chancellors Suite

In response to customer queries and demands, two Student Printing colour Kyocera A4/A3 MFDs have been located in the University House Atrium and made available for immediate use.

This building requires your valid University ID card to be scanned at the front door to gain access.

Please follow all relevant government guidelines and advice in relation to social distancing and hand washing when using this facility.

Any issues?

Please report them to the ITS Helpdesk in the usual way